Bromine

Data at NIST subscription sites:

NIST subscription sites provide data under the NIST Standard Reference Data Program, but require an annual fee to access. The purpose of the fee is to recover costs associated with the development of data collections included in such sites. Your institution may already be a subscriber. Follow the links above to find out more about the data in these sites and their terms of usage.

Reaction thermochemistry data

Go To: Top, References, Notes

Data compilation copyright by the U.S. Secretary of Commerce on behalf of the U.S.A. All rights reserved.

Data compiled as indicated in comments:
MS - José A. Martinho Simões
B - John E. Bartmess
ALS - Hussein Y. Afeefy, Joel F. Liebman, and Stephen E. Stein

Note: Please consider using the reaction search for this species. This page allows searching of all reactions involving this species. A general reaction search form is also available. Future versions of this site may rely on reaction search pages in place of the enumerated reaction displays seen below.

Reactions 1 to 50

C8H6MoO3 (cr) + Bromine (solution) = Hydrogen bromide (solution) + Cyclopentadienylmolybdenumtricarbonyl bromide (cr)

By formula: C8H6MoO3 (cr) + Br2 (solution) = HBr (solution) + C8H5BrMoO3 (cr)

Quantity Value Units Method Reference Comment
ΔrH°-35.8 ± 2.8kcal/molN/ANolan, López de la Vega, et al., 1986solvent: Carbon tetrachloride; The reaction enthalpy was calculated Nolan, López de la Vega, et al., 1986 from the experimental values for the enthalpies of the following reactions: Mo(Cp)(CO)3(H)(cr) + 2Br2(solution) = Mo(Cp)(CO)2(Br)3(solution) + HBr(solution) + CO(solution), -60.7 ± 2.0 kcal/mol, and Mo(Cp)(CO)3(Br)(cr) + Br2(solution) = Mo(Cp)(CO)2(Br)3(solution) + CO(solution), -24.9 ± 2.0 kcal/mol; MS

C16H10Mo2O6 (cr) + Bromine (solution) = 2Cyclopentadienylmolybdenumtricarbonyl bromide (cr)

By formula: C16H10Mo2O6 (cr) + Br2 (solution) = 2C8H5BrMoO3 (cr)

Quantity Value Units Method Reference Comment
ΔrH°-42.2 ± 4.1kcal/molN/ANolan, López de la Vega, et al., 1986solvent: Carbon tetrachloride; The reaction enthalpy was calculated Nolan, López de la Vega, et al., 1986 from the experimental values for the enthalpies of the following reactions: [Mo(Cp)(CO)3]2(cr) + 3Br2(solution) = 2Mo(Cp)(CO)2(Br)3(solution) + 2CO(solution), -92.0 ± 1.0 kcal/mol, and Mo(Cp)(CO)3(Br)(cr) + Br2(solution) = Mo(Cp)(CO)2(Br)3(solution) + CO(solution), -24.9 ± 2.0 kcal/mol; MS

Bromine anion + Bromine = (Bromine anion • Bromine)

By formula: Br- + Br2 = (Br- • Br2)

Quantity Value Units Method Reference Comment
ΔrH°30.4 ± 1.7kcal/molCIDTNizzi, Pommerening, et al., 1998gas phase; B
ΔrH°33.70kcal/molN/ACheck, Faust, et al., 2001gas phase; Fe-; ; ΔS(EA)=5.8; B
Quantity Value Units Method Reference Comment
ΔrG°22.50kcal/molN/ACheck, Faust, et al., 2001gas phase; Fe-; ; ΔS(EA)=5.8; B

1-Butene + Bromine = Butane, 1,2-dibromo-

By formula: C4H8 + Br2 = C4H8Br2

Quantity Value Units Method Reference Comment
ΔrH°-28.90kcal/molCmLister, 1941gas phase; Heat of bromination at 300 K; ALS
ΔrH°-29.44 ± 0.20kcal/molCmConn, Kistiakowsky, et al., 1938gas phase; Reanalyzed by Cox and Pilcher, 1970, Original value = -29.59 ± 0.20 kcal/mol; At 355 °K; ALS

2-Butene, (E)- + Bromine = erythro-2,3-Dibromobutane

By formula: C4H8 + Br2 = C4H8Br2

Quantity Value Units Method Reference Comment
ΔrH°-28.95 ± 0.20kcal/molCmConn, Kistiakowsky, et al., 1938gas phase; Reanalyzed by Cox and Pilcher, 1970, Original value = -29.08 ± 0.20 kcal/mol; At 355 °K; ALS

Ethylene + Bromine = Ethane, 1,2-dibromo-

By formula: C2H4 + Br2 = C2H4Br2

Quantity Value Units Method Reference Comment
ΔrH°-28.90 ± 0.30kcal/molCmConn, Kistiakowsky, et al., 1938gas phase; Reanalyzed by Cox and Pilcher, 1970, Original value = -29.06 ± 0.30 kcal/mol; At 355 °K; ALS

Propene + Bromine = Propane, 1,2-dibromo-

By formula: C3H6 + Br2 = C3H6Br2

Quantity Value Units Method Reference Comment
ΔrH°-29.27 ± 0.20kcal/molCmConn, Kistiakowsky, et al., 1938gas phase; Reanalyzed by Cox and Pilcher, 1970, Original value = -29.41 ± 0.20 kcal/mol; At 355 °K; ALS

Hydrogen bromide + Benzene, (bromomethyl)- = Toluene + Bromine

By formula: HBr + C7H7Br = C7H8 + Br2

Quantity Value Units Method Reference Comment
ΔrH°8.1 ± 1.0kcal/molEqkBenson and Buss, 1957gas phase; Reanalyzed by Cox and Pilcher, 1970, Original value = 8.0 ± 0.9 kcal/mol; ALS

Carbonic dibromide = Carbon monoxide + Bromine

By formula: CBr2O = CO + Br2

Quantity Value Units Method Reference Comment
ΔrH°8.10 ± 0.10kcal/molEqkDunning and Pritchard, 1972gas phase; ALS
ΔrH°1.0 ± 0.1kcal/molEqkSchumacher and Bergmann, 1931gas phase; ALS

Trimethylindium (l) + 3Bromine (l) = Br3In (cr) + 3Methane, bromo- (g)

By formula: C3H9In (l) + 3Br2 (l) = Br3In (cr) + 3CH3Br (g)

Quantity Value Units Method Reference Comment
ΔrH°-159.0 ± 1.0kcal/molRSCClarke and Price, 1968Please also see Pedley and Rylance, 1977 and Cox and Pilcher, 1970, 2.; MS

Mercury, dimethyl- (l) + 2Bromine (l) = 2Methane, bromo- (g) + Mercury(II) bromide (cr)

By formula: C2H6Hg (l) + 2Br2 (l) = 2CH3Br (g) + Br2Hg (cr)

Quantity Value Units Method Reference Comment
ΔrH°-72.20 ± 0.60kcal/molRSCHartley, Pritchard, et al., 1950Please also see Pedley and Rylance, 1977 and Cox and Pilcher, 1970, 2.; MS

Stannane, trimethyl(phenylmethyl)- (l) + Bromine (g) = Benzene, (bromomethyl)- (l) + C3H9BrSn (l)

By formula: C10H16Sn (l) + Br2 (g) = C7H7Br (l) + C3H9BrSn (l)

Quantity Value Units Method Reference Comment
ΔrH°-54.2 ± 0.2kcal/molRSCPedley and Skinner, 1959Please also see Pedley and Rylance, 1977 and Cox and Pilcher, 1970, 2.; MS

Stannane, tetramethyl- (l) + Bromine (g) = C3H9BrSn (l) + Methane, bromo- (g)

By formula: C4H12Sn (l) + Br2 (g) = C3H9BrSn (l) + CH3Br (g)

Quantity Value Units Method Reference Comment
ΔrH°-48.30 ± 0.69kcal/molRSCPedley, Skinner, et al., 1957Please also see Pedley and Rylance, 1977 and Cox and Pilcher, 1970, 2.; MS

C8H6MoO3 (cr) + 2Bromine (solution) = C7H5Br3MoO2 (solution) + Hydrogen bromide (solution) + Carbon monoxide (solution)

By formula: C8H6MoO3 (cr) + 2Br2 (solution) = C7H5Br3MoO2 (solution) + HBr (solution) + CO (solution)

Quantity Value Units Method Reference Comment
ΔrH°-60.7 ± 2.0kcal/molRSCNolan, López de la Vega, et al., 1986solvent: Carbon tetrachloride; MS

Propanedioic acid + Bromine = Hydrogen bromide + Propanedioic acid, 2-bromo-

By formula: C3H4O4 + Br2 = HBr + C3H3BrO4

Quantity Value Units Method Reference Comment
ΔrH°-15.8 ± 0.69kcal/molCmKoros, Orban, et al., 1979liquid phase; solvent: Sulfuric acid (1M); Bromination; ALS

Hexamethylditin (l) + Bromine (l) = 2C3H9BrSn (l)

By formula: C6H18Sn2 (l) + Br2 (l) = 2C3H9BrSn (l)

Quantity Value Units Method Reference Comment
ΔrH°-70.24 ± 0.50kcal/molRSCPedley, Skinner, et al., 1957Please also see Pedley and Rylance, 1977 and Cox and Pilcher, 1970, 2.; MS

C16H10Mo2O6 (cr) + 3Bromine (solution) = 2C7H5Br3MoO2 (solution) + 2Carbon monoxide (solution)

By formula: C16H10Mo2O6 (cr) + 3Br2 (solution) = 2C7H5Br3MoO2 (solution) + 2CO (solution)

Quantity Value Units Method Reference Comment
ΔrH°-92.0 ± 1.0kcal/molRSCNolan, López de la Vega, et al., 1986solvent: Carbon tetrachloride; MS

Hydrogen bromide + Bromoacetone = Acetone + Bromine

By formula: HBr + C3H5BrO = C3H6O + Br2

Quantity Value Units Method Reference Comment
ΔrH°7.4 ± 2.0kcal/molEqkKing, Golden, et al., 1971gas phase; Heat of bromination at 516-618 K; ALS

Cyclopentadienylmolybdenumtricarbonyl bromide (cr) + Bromine (solution) = C7H5Br3MoO2 (solution) + Carbon monoxide (solution)

By formula: C8H5BrMoO3 (cr) + Br2 (solution) = C7H5Br3MoO2 (solution) + CO (solution)

Quantity Value Units Method Reference Comment
ΔrH°-24.9 ± 2.0kcal/molRSCNolan, López de la Vega, et al., 1986solvent: Carbon tetrachloride; MS

C12H7MnO5 (cr) + 1.5Bromine (g) = Benzene, (bromomethyl)- (g) + manganese dibromide (cr) + 5Carbon monoxide (g)

By formula: C12H7MnO5 (cr) + 1.5Br2 (g) = C7H7Br (g) + Br2Mn (cr) + 5CO (g)

Quantity Value Units Method Reference Comment
ΔrH°-46.5 ± 1.9kcal/molHAL-HFCConnor, Zafarani-Moattar, et al., 1982MS

Bromine + Cyclooctene = 1,2-Dibromocyclooctane

By formula: Br2 + C8H14 = C8H14Br2

Quantity Value Units Method Reference Comment
ΔrH°-29.310kcal/molCmLister, 1941gas phase; Heat of bromination at 300 K; ALS

C6F3MnO5 (cr) + 1.5Bromine (g) = manganese dibromide (cr) + 5Carbon monoxide (g) + Bromotrifluoromethane (g)

By formula: C6F3MnO5 (cr) + 1.5Br2 (g) = Br2Mn (cr) + 5CO (g) + CBrF3 (g)

Quantity Value Units Method Reference Comment
ΔrH°-41.3 ± 0.7kcal/molHAL-HFCConnor, Zafarani-Moattar, et al., 1982MS

C7F3MnO6 (cr) + 1.5Bromine (g) = manganese dibromide (cr) + 6Carbon monoxide (g) + Bromotrifluoromethane (g)

By formula: C7F3MnO6 (cr) + 1.5Br2 (g) = Br2Mn (cr) + 6CO (g) + CBrF3 (g)

Quantity Value Units Method Reference Comment
ΔrH°-38.6 ± 0.5kcal/molHAL-HFCConnor, Zafarani-Moattar, et al., 1982MS

Cyclohexene + Bromine = Cyclohexane, 1,2-dibromo-

By formula: C6H10 + Br2 = C6H10Br2

Quantity Value Units Method Reference Comment
ΔrH°-33.630kcal/molCmLister, 1941gas phase; Heat of bromination at 300 K; ALS

Cycloheptene + Bromine = 1,2-Dibromocycloheptane

By formula: C7H12 + Br2 = C7H12Br2

Quantity Value Units Method Reference Comment
ΔrH°-30.44kcal/molCmLister, 1941gas phase; Heat of bromination at 300 K; ALS

1-Heptene + Bromine = C7H14Br2

By formula: C7H14 + Br2 = C7H14Br2

Quantity Value Units Method Reference Comment
ΔrH°-30.24kcal/molCmLister, 1941gas phase; Heat of bromination at 300 K; ALS

Cyclopentene + Bromine = Cyclopentane, 1,2-dibromo,trans-

By formula: C5H8 + Br2 = C5H8Br2

Quantity Value Units Method Reference Comment
ΔrH°-28.61 ± 0.60kcal/molCmLister, 1941gas phase; Halogenation at 27 C; ALS

Manganese, pentacarbonylmethyl- (cr) + 1.5Bromine (g) = manganese dibromide (cr) + 5Carbon monoxide (g) + Methane, bromo- (g)

By formula: C6H3MnO5 (cr) + 1.5Br2 (g) = Br2Mn (cr) + 5CO (g) + CH3Br (g)

Quantity Value Units Method Reference Comment
ΔrH°-50.0 ± 0.7kcal/molHAL-HFCConnor, Zafarani-Moattar, et al., 1982MS

Manganese, acetylpentacarbonyl-, (OC-6-21)- (cr) + 1.5Bromine (g) = manganese dibromide (cr) + 6Carbon monoxide (g) + Methane, bromo- (g)

By formula: C7H3MnO6 (cr) + 1.5Br2 (g) = Br2Mn (cr) + 6CO (g) + CH3Br (g)

Quantity Value Units Method Reference Comment
ΔrH°-38. ± 1.kcal/molHAL-HFCConnor, Zafarani-Moattar, et al., 1982MS

Benzene, (bromomethyl)- + 0.5Hydrogen = Toluene + 0.5Bromine

By formula: C7H7Br + 0.5H2 = C7H8 + 0.5Br2

Quantity Value Units Method Reference Comment
ΔrH°-0.9 ± 0.5kcal/molChydAshcroft, Carson, et al., 1963liquid phase; ALS

C10H22Mg (cr) + Hydrogen (g) + Bromine (l) = 2Neopentane (l) + Br2Mg (cr)

By formula: C10H22Mg (cr) + H2 (g) + Br2 (l) = 2C5H12 (l) + Br2Mg (cr)

Quantity Value Units Method Reference Comment
ΔrH°-160.0 ± 1.6kcal/molRSCAkkerman, Schat, et al., 1983MS

Ethene, tetrafluoro- + Bromine = 1,2-Dibromotetrafluoroethane

By formula: C2F4 + Br2 = C2Br2F4

Quantity Value Units Method Reference Comment
ΔrH°-38.48kcal/molCmLacher, Casali, et al., 1956gas phase; Heat of bromination; ALS

2Benzene, bromo- + Mercury(II) bromide = Mercury, diphenyl- + 2Bromine

By formula: 2C6H5Br + Br2Hg = C12H10Hg + 2Br2

Quantity Value Units Method Reference Comment
ΔrH°78.53 ± 0.80kcal/molCmChernick, Skinner, et al., 1956liquid phase; ALS

Dimanganese decacarbonyl (cr) + 2Bromine (g) = 2manganese dibromide (cr) + 10Carbon monoxide (g)

By formula: C10Mn2O10 (cr) + 2Br2 (g) = 2Br2Mn (cr) + 10CO (g)

Quantity Value Units Method Reference Comment
ΔrH°-63.0 ± 2.0kcal/molHAL-HFCConnor, Zafarani-Moattar, et al., 1982MS

Hydrogen + 2Methane, bromo- = 2Methane + Bromine

By formula: H2 + 2CH3Br = 2CH4 + Br2

Quantity Value Units Method Reference Comment
ΔrH°-6.6 ± 0.6kcal/molChydAdams, Carson, et al., 1966liquid phase; ALS

2-Butene, (Z)- + Bromine = Erythro-2,3-dibromobutane

By formula: C4H8 + Br2 = C4H8Br2

Quantity Value Units Method Reference Comment
ΔrH°-30.18 ± 0.20kcal/molCmConn, Kistiakowsky, et al., 1938gas phase; At 355 °K; ALS

2-Butene, 2-methyl- + Bromine = 2,3-dibromo-2-methylbutane

By formula: C5H10 + Br2 = C5H10Br2

Quantity Value Units Method Reference Comment
ΔrH°-30.40 ± 0.20kcal/molCmConn, Kistiakowsky, et al., 1938gas phase; At 355 °K; ALS

2-Butenedioic acid, 2-methyl-, (Z)- + Bromine = 2-Butenedioic acid, 2-methyl-, (E)- + Bromine

By formula: C5H6O4 + Br2 = C5H6O4 + Br2

Quantity Value Units Method Reference Comment
ΔrH°-1.2 ± 0.2kcal/molEqkJwo, Huang, et al., 1987solid phase; HPLC; ALS

Bromine + Ethene, chlorotrifluoro- = 1,2-Dibromo-1-chloro-1,2,2-trifluoroethane

By formula: Br2 + C2ClF3 = C2Br2ClF3

Quantity Value Units Method Reference Comment
ΔrH°-31.61kcal/molCmLacher, Casali, et al., 1956gas phase; Heat of bromination; ALS

Br3- + Bromine = (Br3- • Bromine)

By formula: Br3- + Br2 = (Br3- • Br2)

Quantity Value Units Method Reference Comment
ΔrH°9.1 ± 1.7kcal/molCIDTNizzi, Pommerening, et al., 1998gas phase; B

Manganese pentacarbonyl bromide (cr) + 0.5Bromine (g) = manganese dibromide (cr) + 5Carbon monoxide (g)

By formula: C5BrMnO5 (cr) + 0.5Br2 (g) = Br2Mn (cr) + 5CO (g)

Quantity Value Units Method Reference Comment
ΔrH°2.4 ± 0.43kcal/molHAL-HFCConnor, Zafarani-Moattar, et al., 1982MS

Hydrogen + 2Ethyl bromide = 2Ethane + Bromine

By formula: H2 + 2C2H5Br = 2C2H6 + Br2

Quantity Value Units Method Reference Comment
ΔrH°5.6 ± 3.0kcal/molChydAshcroft, Carson, et al., 1965liquid phase; ALS

Trichloromethane + Bromine = Hydrogen bromide + Methane, bromotrichloro-

By formula: CHCl3 + Br2 = HBr + CBrCl3

Quantity Value Units Method Reference Comment
ΔrH°-1.4 ± 0.1kcal/molEqkMendenhall, Golden, et al., 1973gas phase; ALS

Difluoromethane + Bromine = Hydrogen bromide + Methane, bromodifluoro-

By formula: CH2F2 + Br2 = HBr + CHBrF2

Quantity Value Units Method Reference Comment
ΔrH°-9.54 ± 0.07kcal/molEqkOkafo and Whittle, 1974gas phase; ALS

Carbon Tetrachloride + Bromine = bromine chloride + Methane, bromotrichloro-

By formula: CCl4 + Br2 = BrCl + CBrCl3

Quantity Value Units Method Reference Comment
ΔrH°8.8 ± 0.3kcal/molEqkMendenhall, Golden, et al., 1973gas phase; ALS

Fluoroform + Bromine = Hydrogen bromide + Bromotrifluoromethane

By formula: CHF3 + Br2 = HBr + CBrF3

Quantity Value Units Method Reference Comment
ΔrH°-3.3kcal/molEqkCorbett, Tarr, et al., 1963gas phase; At 298 K; ALS

Methane, tribromo- + Bromine = Hydrogen bromide + Carbon tetrabromide

By formula: CHBr3 + Br2 = HBr + CBr4

Quantity Value Units Method Reference Comment
ΔrH°-1.7 ± 0.7kcal/molEqkKing, Golden, et al., 1971, 2gas phase; ALS

Hydrogen bromide + Bromotrifluoromethane = Fluoroform + Bromine

By formula: HBr + CBrF3 = CHF3 + Br2

Quantity Value Units Method Reference Comment
ΔrH°4.59 ± 0.25kcal/molEqkCoomber and Whittle, 1967gas phase; ALS

Methane + Bromine = Hydrogen bromide + Methane, bromo-

By formula: CH4 + Br2 = HBr + CH3Br

Quantity Value Units Method Reference Comment
ΔrH°-6.3 ± 0.2kcal/molEqkFerguson, Okafo, et al., 1973gas phase; ALS

Propane, 1,2-dibromo-2-methyl- = 1-Propene, 2-methyl- + Bromine

By formula: C4H8Br2 = C4H8 + Br2

Quantity Value Units Method Reference Comment
ΔrH°33.40 ± 0.11kcal/molCmSunner and Wulff, 1974liquid phase; ALS

References

Go To: Top, Reaction thermochemistry data, Notes

Data compilation copyright by the U.S. Secretary of Commerce on behalf of the U.S.A. All rights reserved.

Nolan, López de la Vega, et al., 1986
Nolan, S.P.; López de la Vega, R.; Hoff, C.D., J. Organometal. Chem., 1986, 315, 187. [all data]

Nizzi, Pommerening, et al., 1998
Nizzi, K.E.; Pommerening, C.A.; Sunderlin, L.S., Gas-phase thermochemistry of polyhalide anions, J. Phys. Chem. A, 1998, 102, 39, 7674-7679, https://doi.org/10.1021/jp9824508 . [all data]

Check, Faust, et al., 2001
Check, C.E.; Faust, T.O.; Bailey, J.M.; Wright, B.J.; Gilbert, T.M.; Sunderlin, L.S., Addition of Polarization and Diffuse Functions to the LANL2DZ Basis Set for P-Block Elements, J. Phys. Chem. A,, 2001, 105, 34, 8111, https://doi.org/10.1021/jp011945l . [all data]

Lister, 1941
Lister, M.W., Heats of organic reactions. X. Heats of bromination of cyclic olefins, J. Am. Chem. Soc., 1941, 63, 143-149. [all data]

Conn, Kistiakowsky, et al., 1938
Conn, J.B.; Kistiakowsky, G.B.; Smith, E.A., Heats of organic reactions. VII. Addition of halogens to olefins, J. Am. Chem. Soc., 1938, 60, 2764-2771. [all data]

Cox and Pilcher, 1970
Cox, J.D.; Pilcher, G., Thermochemistry of Organic and Organometallic Compounds, Academic Press, New York, 1970, 1-636. [all data]

Benson and Buss, 1957
Benson, S.W.; Buss, J.H., The thermodynamics of bromination of toluene and the heat of formation of the benzyl radical, J. Phys. Chem., 1957, 61, 104-109. [all data]

Dunning and Pritchard, 1972
Dunning, B.K.; Pritchard, H.O., The enthalpy of formation of bromophosgene, J. Chem. Thermodyn., 1972, 4, 213-218. [all data]

Schumacher and Bergmann, 1931
Schumacher, H.-J.; Bergmann, P., Die kinetik und photochemie des bromphosgens, Z. Phys. Chem., 1931, 13, 269-284. [all data]

Clarke and Price, 1968
Clarke, W.D.; Price, S.J.W., Can. J. Chem., 1968, 46, 1633. [all data]

Pedley and Rylance, 1977
Pedley, J.B.; Rylance, J., Computer Analysed Thermochemical Data: Organic and Organometallic Compounds, University of Sussex, Brigton, 1977. [all data]

Cox and Pilcher, 1970, 2
Cox, J.D.; Pilcher, G., Thermochemistry of Organic and Organometallic Compounds in Academic Press, New York, 1970. [all data]

Hartley, Pritchard, et al., 1950
Hartley, K.; Pritchard, H.O.; Skinner, H.A., Thermochemistry of metallic alkyls. III.?mercury dimethyl and mercury methyl halides, Trans. Faraday Soc., 1950, 46, 1019, https://doi.org/10.1039/tf9504601019 . [all data]

Pedley and Skinner, 1959
Pedley, J.B.; Skinner, H.A., Thermochemistry of metallic alkyls. Part 9.?Heats of bromination of some organo-tin compounds, Trans. Faraday Soc., 1959, 55, 544, https://doi.org/10.1039/tf9595500544 . [all data]

Pedley, Skinner, et al., 1957
Pedley, J.B.; Skinner, H.A.; Chernick, C.L., Thermochemistry of metallic alkyls. Part 8.?Tin tetramethyl, and hexamethyl distannane, Trans. Faraday Soc., 1957, 53, 1612, https://doi.org/10.1039/tf9575301612 . [all data]

Koros, Orban, et al., 1979
Koros, E.; Orban, M.; Nagy, Z., Calorimetric studies on the Belousov-Zhabotinsky oscillatory chemical reaction, Acta Chim. Acad. Sci. Hung., 1979, 100, 449-461. [all data]

King, Golden, et al., 1971
King, K.D.; Golden, D.M.; Benson, S.W., Thermochemistry of the gas-phase equilibrium CH3COCH3 + Br2 = CH3COCH2Br + HBr. The enthalpy of formation of bromoacetone, J. Chem. Thermodyn., 1971, 3, 129-134. [all data]

Connor, Zafarani-Moattar, et al., 1982
Connor, J.A.; Zafarani-Moattar, M.T.; Bickerton, J.; El-Saied, N.I.; Suradi, S.; Carson, R.; Al Takkhin, G.; Skinner, H.A., Organomet., 1982, 1, 1166. [all data]

Ashcroft, Carson, et al., 1963
Ashcroft, S.J.; Carson, A.S.; Pedley, J.B., Thermochemistry of reductions caused by lithium aluminium hydride. Part 2.-The heats of formation of benzyl bromide, benzyl iodide and the benzyl radical, Trans. Faraday Soc., 1963, 59, 2713-2717. [all data]

Akkerman, Schat, et al., 1983
Akkerman, O.S.; Schat, G.; Evers, E.A.I.M.; Bickelhaupt, F., Recl. Trav. Chim. Pays-Bas, 1983, 102, 109. [all data]

Lacher, Casali, et al., 1956
Lacher, J.R.; Casali, L.; Park, J.D., Reaction heats of organic halogen compounds V. The vapor phase bromination of tetrafluoroethylene and trifluorochloroethylene, J. Phys. Chem., 1956, 60, 608-610. [all data]

Chernick, Skinner, et al., 1956
Chernick, C.L.; Skinner, H.A.; Wadso, I., Thermochemistry of metallic alkyls. Part 7.-The heat of formation of mercury diphenyl, and of mercury phenyl chloride, Trans. Faraday Soc., 1956, 52, 1088-1093. [all data]

Adams, Carson, et al., 1966
Adams, G.P.; Carson, A.S.; Laye, P.G., Thermochemistry of reductions caused by lithium aluminium hydride. Part 4.-Heat of formation of methyl bromide, Trans. Faraday Soc., 1966, 62, 1447-1449. [all data]

Jwo, Huang, et al., 1987
Jwo, J-J.; Huang, C-Y.; Chang, E-F.; Wu, R.R., Kinetic study of the bromine-catalyzed isomerization of methyl- and chloro-maleic acids in aqueous Ce(IV)-Br- -H2SO4 medium, J. Chin. Chem. Soc. (Taipei), 1987, 34, 247-256. [all data]

Ashcroft, Carson, et al., 1965
Ashcroft, S.J.; Carson, A.S.; Carter, W.; Laye, P.G., Thermochemistry of reductions caused by lithium aluminium hydride. Part 3.- The C-halogen bond dissociation energies in ethyl iodine and ethyl bromide, Trans. Faraday Soc., 1965, 61, 225-229. [all data]

Mendenhall, Golden, et al., 1973
Mendenhall, G.D.; Golden, D.M.; Benson, S.W., Thermochemistry of the bromination of carbon tetrachloride and the heat of formation of carbon tetrachloride, J. Phys. Chem., 1973, 77, 2707-2709. [all data]

Okafo and Whittle, 1974
Okafo, E.N.; Whittle, E., Bond dissociation energies from equilibrium studies. Part 5.-The equilibria Br2 + CH2F2 = HBr + CHF2Br and Br2 + CH3F = HBr + CH2FBr. Determination of D(CHF2-Br) and ΔH°f (CHF2Br,g), Trans. Faraday Soc., 1974, 17, 1366-1375. [all data]

Corbett, Tarr, et al., 1963
Corbett, P.; Tarr, A.M.; Whittle, E., Vapour-phase bromination of fluoroform and methane, Trans. Faraday Soc., 1963, 59, 1609. [all data]

King, Golden, et al., 1971, 2
King, K.D.; Golden, D.M.; Benson, S.W., Kinetics and thermochemistry of the gas-phase bromination of bromoform. The C-H bond dissociation energy in CHBr3 and the C-Br bond dissociation energy in CBr4, J. Phys. Chem., 1971, 75, 987-989. [all data]

Coomber and Whittle, 1967
Coomber, J.W.; Whittle, E., Bond dissociation energies from equilibrium studies. Part 1.-D(CF3-Br), D(C2F5-Br) and D(n-C3F7-Br), Trans. Faraday Soc., 1967, 63, 608-619. [all data]

Ferguson, Okafo, et al., 1973
Ferguson, K.C.; Okafo, E.N.; Whittle, E., Bond dissociation energies from equilibrium studies Part 4.-The equilibrium Br2 + CH4 = HBr + CH3Br. Determination of D(CH3-Br) and ΔHf°(CH3Br,g), J. Chem. Soc. Faraday Trans. 1, 1973, 69, 295-301. [all data]

Sunner and Wulff, 1974
Sunner, S.; Wulff, C.A., The enthalpy of formation of 1,1-dibromo-2-methylpropane, J. Chem. Thermodyn., 1974, 6, 287-292. [all data]

Notes

Go To: Top, Reaction thermochemistry data, References