Nonane, 2,2-dimethyl

Formula: C₁₁H₂₄
Molecular weight: 156.3083
IUPAC Standard InChI: InChI=1S/C11H24/c1-5-6-7-8-9-10-11(2,3)4/h5-10H2,1-4H3
IUPAC Standard InChIKey: WDSBVMLUILIJOW-UHFFFAOYSA-N
Chemical structure:
This structure is also available as a 2d Mol file or as a computed 3d SD file
The 3d structure may be viewed using Java or Javascript.
Species with the same structure:
- 2,2-dimethylnonane
Other names: 2,2-Dimethylnonane
Information on this page:
Options:
- Switch to calorie-based units

Gas Chromatography

Data compiled by: NIST Mass Spectrometry Data Center, William E. Wallace, director

Kovats' RI, non-polar column, isothermal

Column type	Active phase	Temperature (C)	I	Reference	Comment
Packed	SE-30	110.	1021.	Mitra, Mohan, et al., 1974	N2, Chrom W; Column length: 6.1 m
Packed	SE-30	120.	1023.	Mitra, Mohan, et al., 1974	N2, Chrom W; Column length: 6.1 m
Packed	SE-30	130.	1025.	Mitra, Mohan, et al., 1974	N2, Chrom W; Column length: 6.1 m
Packed	SE-30	140.	1025.	Mitra, Mohan, et al., 1974	N2, Chrom W; Column length: 6.1 m
Capillary	SE-30	130.	1026.	Mitra, Mohan, et al., 1974, 2	H2; Column length: 6.1 m; Column diameter: 3.18 mm
Capillary	SE-30	140.	1025.	Mitra, Mohan, et al., 1974, 2	H2; Column length: 6.1 m; Column diameter: 3.18 mm
Capillary	SE-30	150.	1025.	Mitra, Mohan, et al., 1974, 2	H2; Column length: 6.1 m; Column diameter: 3.18 mm
Capillary	SE-30	160.	1024.	Mitra, Mohan, et al., 1974, 2	H2; Column length: 6.1 m; Column diameter: 3.18 mm
Capillary	SE-30	170.	1026.	Mitra, Mohan, et al., 1974, 2	H2; Column length: 6.1 m; Column diameter: 3.18 mm

Van Den Dool and Kratz RI, non-polar column, temperature ramp

View large format table.

Column type	Active phase	I	Reference	Comment
Capillary	Petrocol DH	1015.	White, Hackett, et al., 1992	100. m/0.25 mm/0.5 μm, He, 1. K/min; T_start: 30. C; T_end: 220. C
Capillary	OV-101	1018.	Hayes and Pitzer, 1981	108. m/0.25 mm/0.2 μm, 1. K/min; T_start: 35. C; T_end: 200. C

References

Go To: Top, Gas Chromatography, Notes

Mitra, Mohan, et al., 1974
Mitra, G.D.; Mohan, G.; Sinha, A., Advances in the utilization of the retention index system for characterizing hydrocarbons in complex mixtures by gas chromatography, J. Chromatogr., 1974, 99, 215-230, https://doi.org/10.1016/S0021-9673(00)90857-4 . [all data]

Mitra, Mohan, et al., 1974, 2
Mitra, G.D.; Mohan, G.; Sinha, A., Gas chromatographic analysis of complex hydrocarbon mixtures, J. Chromatogr. A, 1974, 91, 633-648, https://doi.org/10.1016/S0021-9673(01)97944-0 . [all data]

White, Hackett, et al., 1992
White, C.M.; Hackett, J.; Anderson, R.R.; Kail, S.; Spock, P.S., Linear temperature programmed retention indices of gasoline range hydrocarbons and chlorinated hydrocarbons on cross-linked polydimethylsiloxane, J. Hi. Res. Chromatogr., 1992, 15, 2, 105-120, https://doi.org/10.1002/jhrc.1240150211 . [all data]

Hayes and Pitzer, 1981
Hayes, P.C., Jr.; Pitzer, E.W., Kovats indices as a tool in characterizing hydrocarbon fuels in temperature programmed glass capillary gas chromatography. Part 1. Qualitative identification, Inhouse rpt. for Air Force Wright Aeronautical Labs., Air Force Wright Aeronautical Labs., Wright-Patterson AFB, Ohio, 1981, 75. [all data]

Notes

Go To: Top, Gas Chromatography, References

Data from NIST Standard Reference Database 69: NIST Chemistry WebBook
The National Institute of Standards and Technology (NIST) uses its best efforts to deliver a high quality copy of the Database and to verify that the data contained therein have been selected on the basis of sound scientific judgment. However, NIST makes no warranties to that effect, and NIST shall not be liable for any damage that may result from errors or omissions in the Database.
Customer support for NIST Standard Reference Data products.