trans-β-Farnesene
- Formula: C15H24
- Molecular weight: 204.3511
- IUPAC Standard InChI: InChI=1S/C15H24/c1-6-14(4)10-8-12-15(5)11-7-9-13(2)3/h6,9,12H,1,4,7-8,10-11H2,2-3,5H3/b15-12+
- IUPAC Standard InChIKey: JSNRRGGBADWTMC-NTCAYCPXSA-N
- Chemical structure:
This structure is also available as a 2d Mol file - Species with the same structure:
- Stereoisomers:
- Information on this page:
- Other data available:
- Options:
Normal alkane RI, non-polar column, temperature ramp
Go To: Top, References, Notes
Data compilation copyright by the U.S. Secretary of Commerce on behalf of the U.S.A. All rights reserved.
Data compiled by: NIST Mass Spectrometry Data Center, William E. Wallace, director
| Column type | Capillary | Capillary | Capillary | Capillary | Capillary |
|---|---|---|---|---|---|
| Active phase | SE-30 MS | DB-5 | OV-1 | OV-1 | OV-1 |
| Column length (m) | 30. | 30. | 25. | 25. | 25. |
| Carrier gas | Helium | Helium | Hydrogen | Hydrogen | Hydrogen |
| Substrate | |||||
| Column diameter (mm) | 0.25 | 0.25 | 0.32 | 0.32 | 0.32 |
| Phase thickness (μm) | 0.25 | 0.25 | 0.30 | 0.30 | 0.30 |
| Tstart (C) | 50. | 50. | 50. | 50. | 50. |
| Tend (C) | 250. | 250. | 200. | 200. | 200. |
| Heat rate (K/min) | 5. | 2. | 3. | 3. | 3. |
| Initial hold (min) | 5. | 1. | 1. | 1. | |
| Final hold (min) | 10. | 10. | 10. | 10. | |
| I | 1441. | 1457. | 1441. | 1442. | 1442. |
| Reference | Menichini, Tundis, et al., 2011 | Ho, Wang, et al., 2010 | Bicchi, Binello, et al., 1999 | Bicchi, Binello, et al., 1999 | Bicchi, Binello, et al., 1999 |
| Comment | MSDC-RI | MSDC-RI | MSDC-RI | MSDC-RI | MSDC-RI |
| Column type | Capillary | Capillary | Capillary | Capillary |
|---|---|---|---|---|
| Active phase | OV-1 | OV-1 | OV-1 | OV-1 |
| Column length (m) | 25. | 25. | 25. | 25. |
| Carrier gas | Hydrogen | Hydrogen | Hydrogen | Hydrogen |
| Substrate | ||||
| Column diameter (mm) | 0.32 | 0.32 | 0.32 | 0.32 |
| Phase thickness (μm) | 0.30 | 0.30 | 0.30 | 0.30 |
| Tstart (C) | 50. | 50. | 50. | 50. |
| Tend (C) | 200. | 200. | 200. | 200. |
| Heat rate (K/min) | 3. | 3. | 3. | 3. |
| Initial hold (min) | 1. | 1. | 1. | 1. |
| Final hold (min) | 10. | 10. | 10. | 10. |
| I | 1442. | 1443. | 1443. | 1444. |
| Reference | Bicchi, Binello, et al., 1999 | Bicchi, Binello, et al., 1999 | Bicchi, Binello, et al., 1999 | Bicchi, Binello, et al., 1999 |
| Comment | MSDC-RI | MSDC-RI | MSDC-RI | MSDC-RI |
References
Go To: Top, Normal alkane RI, non-polar column, temperature ramp, Notes
Data compilation copyright by the U.S. Secretary of Commerce on behalf of the U.S.A. All rights reserved.
Menichini, Tundis, et al., 2011
Menichini, F.; Tundis, R.; Bonesi, M.; de Cindio, B.; Loizzo, M.R.; Conforti, F.; Statti, G.A.; Menabeni, R.; Bettini, R.; Menichini, F.,
Chemical composition and bioactivity of Citrus medica L. cv. Diamante essential oil obtained by hydrodistillation, cold-pressing and supercritical carbon dioxide extraction,
Nat. Prod. Res., 2011, 25, 8, 789-799, https://doi.org/10.1080/14786410902900085
. [all data]
Ho, Wang, et al., 2010
Ho, C.-L.; Wang, E.I.-C.; Yu, H.-T.; Yu, H.-M.; Su, Y.-C.,
Composition amd antioxidant activities of essential oils of different tissues from Cryptomeria japonica D. Don,
Quarterly J. Chin. Forestry, 2010, 32, 1, 63-76. [all data]
Bicchi, Binello, et al., 1999
Bicchi, C.; Binello, A.; D'Amato, A.; Rubiolo, P.,
Reliability of Van den Dool retention indices in the analysis of essential oils,
J. Chromatogr. Sci., 1999, 37, 8, 288-294, https://doi.org/10.1093/chromsci/37.8.288
. [all data]
Notes
Go To: Top, Normal alkane RI, non-polar column, temperature ramp, References
- Symbols used in this document:
Tend Final temperature Tstart Initial temperature - Data from NIST Standard Reference Database 69: NIST Chemistry WebBook
- The National Institute of Standards and Technology (NIST) uses its best efforts to deliver a high quality copy of the Database and to verify that the data contained therein have been selected on the basis of sound scientific judgment. However, NIST makes no warranties to that effect, and NIST shall not be liable for any damage that may result from errors or omissions in the Database.
- Customer support for NIST Standard Reference Data products.