Pyrene

Formula: C₁₆H₁₀
Molecular weight: 202.2506
IUPAC Standard InChI: InChI=1S/C16H10/c1-3-11-7-9-13-5-2-6-14-10-8-12(4-1)15(11)16(13)14/h1-10H
IUPAC Standard InChIKey: BBEAQIROQSPTKN-UHFFFAOYSA-N
CAS Registry Number: 129-00-0
Chemical structure:
This structure is also available as a 2d Mol file or as a computed 3d SD file
The 3d structure may be viewed using Java or Javascript.
Other names: β-Pyrene; Benzo[def]phenanthrene; Pyren; Coal tar pitch volatiles:pyrene
Permanent link for this species. Use this link for bookmarking this species for future reference.
Information on this page:
Other data available:
Data at other public NIST sites:
- Gas Phase Kinetics Database
- NIST Polycyclic Aromatic Hydrocarbon Structure Index
Options:
- Switch to SI units

Data at NIST subscription sites:

NIST subscription sites provide data under the NIST Standard Reference Data Program, but require an annual fee to access. The purpose of the fee is to recover costs associated with the development of data collections included in such sites. Your institution may already be a subscriber. Follow the links above to find out more about the data in these sites and their terms of usage.

IR Spectrum

Go To: Top, Gas Chromatography, References, Notes

Data compiled by: Coblentz Society, Inc.

SOLUTION (10% CCl4 FOR 4000-1340, 10% CCl4 FOR 440-200, 10% CS2 FOR 1340-430 CM^-1); BECKMAN IR-12 (GRATING); 2 cm^-1 resolution

Data compiled by: Timothy J. Johnson, Tanya L. Myers, Yin-Fong Su, Russell G. Tonkyn, Molly Rose K. Kelly-Gorham, and Tyler O. Danby

solid; Bruker Tensor 37 FTIR; 0.96450084 cm^-1 resolution

Data compiled by: NIST Mass Spectrometry Data Center, William E. Wallace, director

gas; HP-GC/MS/IRD

Gas Chromatography

Go To: Top, IR Spectrum, References, Notes

Data compiled by: NIST Mass Spectrometry Data Center, William E. Wallace, director

Kovats' RI, non-polar column, isothermal

View large format table.

Column type	Active phase	Temperature (C)	I	Reference	Comment
Capillary	SPB-5	180.	2103.	Corbella, Rodríguez, et al., 1995	15. m/0.32 mm/0.25 μm, He
Capillary	CP Sil 5 CB	240.	2119.	Hanai and Hong, 1989	30. m/0.25 mm/0.25 μm
Packed	SE-30	200.	2101.	Shlyakhov, Anvaer, et al., 1975

Kovats' RI, polar column, isothermal

View large format table.

Column type	Active phase	Temperature (C)	I	Reference	Comment
Capillary	CP-Wax	240.	3183.	Hanai and Hong, 1989	25. m/0.25 mm/0.22 μm

Van Den Dool and Kratz RI, non-polar column, temperature ramp

View large format table.

Column type	Active phase	I	Reference	Comment
Capillary	DB-5	2113.4	Song, Lai, et al., 2003	30. m/0.25 mm/0.25 μm, He, 4. K/min; T_start: 40. C; T_end: 310. C
Capillary	DB-5	2113.4	Song, Lai, et al., 2003	30. m/0.25 mm/0.25 μm, He, 40. C @ 5. min, 4. K/min; T_end: 310. C
Capillary	DB-5	2082.6	Song, Lai, et al., 2003	30. m/0.25 mm/0.25 μm, He, 2. K/min; T_start: 40. C; T_end: 310. C
Capillary	DB-5	2113.4	Song, Lai, et al., 2003	30. m/0.25 mm/0.25 μm, He, 4. K/min; T_start: 40. C; T_end: 310. C
Capillary	DB-5	2132.5	Song, Lai, et al., 2003	30. m/0.25 mm/0.25 μm, He, 6. K/min; T_start: 40. C; T_end: 310. C
Capillary	OV-1	2080.4	Zhang, Shen, et al., 2000	25. m/0.2 mm/0.33 μm, 5. K/min; T_start: 100. C; T_end: 180. C
Capillary	OV-1	2126.4	Zhang, Shen, et al., 2000	25. m/0.2 mm/0.33 μm, 5. K/min; T_start: 100. C; T_end: 180. C
Capillary	OV-1	2095.8	Gautzsch and Zinn, 1996	8. K/min; T_start: 35. C; T_end: 300. C
Capillary	DB-5	2082.6	Lai and Song, 1995	30. m/0.25 mm/0.25 μm, He, 2. K/min; T_start: 40. C; T_end: 310. C
Capillary	DB-5	2113.4	Lai and Song, 1995	30. m/0.25 mm/0.25 μm, He, 4. K/min; T_start: 40. C; T_end: 310. C
Capillary	DB-5	2132.5	Lai and Song, 1995	30. m/0.25 mm/0.25 μm, He, 6. K/min; T_start: 40. C; T_end: 310. C
Capillary	DB-5	2113.4	Lai and Song, 1995	30. m/0.25 mm/0.25 μm, He, 4. K/min; T_start: 40. C; T_end: 310. C
Capillary	DB-5	2113.4	Lai and Song, 1995	30. m/0.25 mm/0.25 μm, He, 40. C @ 5. min, 4. K/min; T_end: 310. C
Capillary	SP-2100	2049.68	Podmaniczky, Szepesy, et al., 1986	H2, 4. K/min; T_start: 170. C
Capillary	SP-2100	2060.85	Podmaniczky, Szepesy, et al., 1986	H2, 6. K/min; T_start: 170. C
Capillary	SP-2100	2069.40	Podmaniczky, Szepesy, et al., 1986	H2, 2. K/min; T_start: 170. C
Capillary	SP-2100	2069.26	Podmaniczky, Szepesy, et al., 1986	H2, 4. K/min; T_start: 170. C
Capillary	SP-2100	2091.45	Podmaniczky, Szepesy, et al., 1986	H2, 6. K/min; T_start: 170. C
Capillary	CP Sil 5 CB	2073.47	Podmaniczky, Szepesy, et al., 1986	H2, 4. K/min; T_start: 170. C
Capillary	SE-52	2057.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 33.3 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2041.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2054.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2055.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2055.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2055.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2055.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2070.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2070.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2070.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2070.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2078.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2079.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2080.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2086.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2086.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2093.	Beernaert, 1979	He, 50. C @ 5. min, 6. K/min; Column length: 16.6 m; Column diameter: 0.50 mm; T_end: 320. C
Capillary	SE-52	2063.99	Lee, Vassilaros, et al., 1979	12. m/0.3 mm/0.34 μm, He, 2. K/min; T_start: 50. C; T_end: 250. C
Capillary	SE-52	2048.56	Lee, Vassilaros, et al., 1979	12. m/0.28 mm/0.17 μm, He, 2. K/min; T_start: 50. C; T_end: 250. C
Capillary	SE-52	2070.	Carugno and Rossi, 1967	N2, 1.8 K/min; Column length: 65. m; Column diameter: 0.3 mm; T_start: 100. C; T_end: 300. C
Capillary	SE-52	2040.	Cantuti, Cartoni, et al., 1965	N2, 2.5 K/min; Column length: 50. m; T_start: 100. C; T_end: 300. C

Van Den Dool and Kratz RI, non-polar column, custom temperature program

View large format table.

Column type	Active phase	I	Reference	Comment
Capillary	HP-1	2069.7	Dimitriou-Christidis, Harris, et al., 2003	30. m/0.25 mm/0.25 μm; Program: 60C => 7C/min => 225C => 15C/min => 300C(11.43min)
Capillary	HP-5	2120.64	Dimitriou-Christidis, Harris, et al., 2003	30. m/0.25 mm/0.25 μm; Program: 60C => 7C/min => 225C => 15C/min => 300C(11.43min)
Capillary	DB-5	2136.	Havenga and Rohwer, 1999	30. m/0.25 mm/0.25 μm, He; Program: 60 0C 7 0C/min -> 130 0C 5 0C/min -> 200 0C 6 0C/min -> 260 0C 20 0C/min -> 320 0C (4 min)
Capillary	OV-101	2044.	Yasuhara, Shiraishi, et al., 1997	15. m/0.25 mm/0.25 μm, He; Program: 50C(2min) => (20C/min) => 120C => (7C/min) => 310C(10min)
Capillary	5 % Phenyl methyl siloxane	2089.	Yasuhara, Shiraishi, et al., 1997	25. m/0.31 mm/0.52 μm, He; Program: 50C(2min) => (20C/min) => 120C => (7C/min) => 310C(10min)
Capillary	Methyl Silicone	2042.	Oda, Ichikawa, et al., 1996	Program: 50C (2min) => 20C/min => 160C => 5C/min => 210C => 10C/min => 300C
Capillary	Methyl Silicone	2061.	Oda, Ichikawa, et al., 1996	Program: 50C (2min) => 20C/min => 160C => 5C/min => 210C => 10C/min => 300C

Normal alkane RI, non-polar column, temperature ramp

View large format table.

Column type	Active phase	I	Reference	Comment
Capillary	HP-5	2103.	Miao and Wu, 1999	30. m/0.32 mm/0.25 μm, 50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	2104.	Miao and Wu, 1999	30. m/0.32 mm/0.25 μm, 50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	2109.	Miao and Wu, 1999	30. m/0.32 mm/0.25 μm, 50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	2109.	Miao and Wu, 1999	30. m/0.32 mm/0.25 μm, 50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	2112.	Miao and Wu, 1999	30. m/0.32 mm/0.25 μm, 50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	2114.	Miao and Wu, 1999	30. m/0.32 mm/0.25 μm, 50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	2134.	Miao and Wu, 1999	30. m/0.32 mm/0.25 μm, 50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	2135.	Miao and Wu, 1999	30. m/0.32 mm/0.25 μm, 50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	Ultra-1	2085.	Elizalde-González, Hutfliess, et al., 1996	50. m/0.2 mm/0.33 μm, H2, 3. K/min, 300. C @ 35. min; T_start: 60. C
Capillary	SE-54	2096.	Harland, Cumming, et al., 1986	He, 50. C @ 2. min, 8. K/min, 250. C @ 12. min; Column length: 25. m; Column diameter: 0.32 mm
Capillary	DB-5	2103.	Quilliam, Lant, et al., 1985	30. m/0.32 mm/0.1 μm, He, 10. K/min; T_start: 60. C; T_end: 290. C

Normal alkane RI, non-polar column, custom temperature program

View large format table.

Column type	Active phase	I	Reference	Comment
Capillary	HP-5MS	2114.	Vichi, Pizzale, et al., 2005	30. m/0.25 mm/0.25 μm; Program: 40C(3min) => 4C/min => 75C => 8C/min => 250C
Capillary	Methyl Silicone	2077.	Oda, Yasuhara, et al., 1998	25. m/0.25 mm/0.25 μm, He; Program: 50 0C (2 min) 20 0C/min -> 160 0C 5 0C/min -> 210 0C 10 0C/min -> 300 0C
Capillary	Methyl Silicone	2046.	Zenkevich, 1996	Program: not specified
Capillary	OV-1	2061.	Waggott and Davies, 1984	Hydrogen; Column length: 50. m; Column diameter: 0.32 mm; Program: not specified

Normal alkane RI, polar column, custom temperature program

View large format table.

Column type	Active phase	I	Reference	Comment
Capillary	Supelcowax-10	3160.	Vichi, Pizzale, et al., 2005	30. m/0.25 mm/0.25 μm; Program: 40C(3min) => 4C/min => 75C => 8C/min => 250C
Capillary	DB-Wax	3135.	Peng, Yang, et al., 1991	Program: not specified

Lee's RI, non-polar column, isothermal

View large format table.

Column type	Active phase	Temperature (C)	I	Reference
Packed	Methyl Silicone	175.	348.91	Shlyakhov, 1984
Packed	Methyl Silicone	200.	348.12	Shlyakhov, 1984
Packed	Methyl Silicone	200.	350.72	Shlyakhov, 1984
Packed	Methyl Silicone	235.	351.42	Shlyakhov, 1984
Packed	Methyl Silicone	240.	350.67	Shlyakhov, 1984
Packed	Methyl Silicone	260.	351.74	Shlyakhov, 1984
Packed	Methyl Silicone	300.	353.42	Shlyakhov, 1984

Lee's RI, non-polar column, temperature ramp

View large format table.

Column type	Active phase	I	Reference	Comment
Capillary	PE-5	351.6	Jamoussi, Kanzari, et al., 2007	20. m/0.18 mm/0.18 μm, 50. C @ 1.5 min, 8. K/min; T_end: 345. C
Capillary	HP-5	340.0	Wang, Hou, et al., 2007	30. m/0.30 mm/0.25 μm, Helium, 50. C @ 5. min, 5. K/min, 200. C @ 15. min
Capillary	HP-5	340.	Shao, Wang, et al., 2006	30. m/0.3 mm/0.25 μm, He, 50. C @ 5. min, 5. K/min, 200. C @ 15. min
Capillary	5 % Phenyl methyl siloxane	351.22	Skrbic and Onjia, 2006	2. K/min; T_start: 50. C; T_end: 250. C
Capillary	5 % Phenyl methyl siloxane	352.80	Skrbic and Onjia, 2006	80. C @ 2. min, 8. K/min, 300. C @ 10. min
Capillary	HP-5	352.67	Pedersen, Durant, et al., 2005	30. m/0.25 mm/0.25 μm, Helium, 50. C @ 1.5 min, 6. K/min, 310. C @ 10. min
Capillary	HP-5	351.91	Marynowski, Pieta, et al., 2004	60. m/0.25 mm/0.25 μm, He, 3. K/min; T_start: 35. C; T_end: 300. C
Capillary	DB-5MS	352.54	Chen, Keeran, et al., 2002	30. m/0.25 mm/0.5 μm, 40. C @ 1. min, 10. K/min; T_end: 310. C
Capillary	DB-5MS	352.72	Chen, Keeran, et al., 2002	30. m/0.25 mm/0.5 μm, 40. C @ 1. min, 4. K/min; T_end: 310. C
Capillary	PTE-5	352.85	Wang, Jia, et al., 2000	30. m/0.25 mm/0.25 μm, 60. C @ 1.5 min, 8. K/min, 300. C @ 12.5 min
Capillary	HP-5	352.13	Miao and Wu, 1999	50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	352.18	Miao and Wu, 1999	50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	352.27	Miao and Wu, 1999	50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	352.29	Miao and Wu, 1999	50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	352.36	Miao and Wu, 1999	50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	352.41	Miao and Wu, 1999	50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	352.65	Miao and Wu, 1999	50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	352.65	Miao and Wu, 1999	50. C @ 2. min, 5. K/min; T_end: 310. C
Capillary	HP-5	352.33	Piao, Chu, et al., 1999	30. m/0.25 mm/0.25 μm, 50. C @ 2. min, 4. K/min, 280. C @ 20. min
Capillary	HP-5	352.37	Piao, Chu, et al., 1999	30. m/0.25 mm/0.25 μm, 50. C @ 2. min, 4. K/min, 280. C @ 20. min
Capillary	DB-5	346.6	Durlak, Biswas, et al., 1998	30. m/0.25 mm/0.25 μm, 15. K/min; T_start: 50. C; T_end: 300. C
Capillary	DB-5	346.6	Durlak, Biswas, et al., 1998	30. m/0.25 mm/0.25 μm, 15. K/min; T_start: 50. C; T_end: 300. C
Capillary	SE-52	351.86	Wang, Peng, et al., 1997	4. K/min; Column length: 30. m; Column diameter: 0.30 mm; T_start: 40. C; T_end: 250. C
Capillary	SE-54	351.88	Chen, 1996	4. K/min; Column length: 30. m; Column diameter: 0.25 mm; T_start: 50. C; T_end: 300. C
Capillary	DB-5	351.51	Williams and Horne, 1995	He, 60. C @ 2. min, 5. K/min; Column length: 25. m; Column diameter: 0.3 mm; T_end: 270. C
Capillary	SE-52	353.40	Shaogang and Xiaobai, 1994	40. C @ 2. min, 4. K/min, 300. C @ 20. min; Column length: 30. m; Column diameter: 0.25 mm
Capillary	DB-5	351.4	Donnelly, Abdel-Hamid, et al., 1993	30. m/0.32 mm/0.25 μm, He, 40. C @ 3. min, 8. K/min, 285. C @ 29.5 min
Capillary	SPB-5	352.9	Knobloch and Engewald, 1993	40. C @ 2. min, 4. K/min; Column length: 30. m; Column diameter: 0.25 mm; T_end: 300. C
Capillary	SE-54	352.52	Guillén, Blanco, et al., 1989	20. m/0.22 mm/0.20 μm, He, 4. K/min; T_start: 50. C; T_end: 300. C
Capillary	SE-52	351.63	Hasegawa, Muragishi, et al., 1988	3. K/min; Column length: 25. m; Column diameter: 0.25 mm; T_start: 130. C; T_end: 260. C
Capillary	DB-5	351.87	Sye, Lin, et al., 1988	30. m/0.32 mm/0.25 μm, 80. C @ 1. min, 3. K/min; T_end: 290. C
Capillary	DB-5	351.91	Wise, Benner, et al., 1988	30. m/0.25 mm/0.25 μm, 40. C @ 2. min, 4. K/min, 280. C @ 5. min
Capillary	SE-52	351.22	Boenke and Ballschmiter, 1987	Hydrogen, 3. K/min; Column length: 12. m; T_start: 120. C; T_end: 285. C
Capillary	DB-5	352.77	Rostad and Pereira, 1986	30. m/0.26 mm/0.25 μm, He, 50. C @ 4. min, 6. K/min, 300. C @ 20. min
Capillary	DB-5	361.6	Quilliam, Lant, et al., 1985	30. m/0.32 mm/0.1 μm, He, 10. K/min; T_start: 60. C; T_end: 290. C
Capillary	DB-5	365.4	Quilliam, Lant, et al., 1985	30. m/0.32 mm/0.1 μm, He, 10. K/min; T_start: 60. C; T_end: 290. C
Capillary	DB-5	352.09	Tong, Centen, et al., 1985	He, 4. K/min; Column length: 30. m; Column diameter: 0.25 mm; T_start: 90. C; T_end: 325. C
Packed	Methyl Silicone	347.41	Shlyakhov, 1984	2. K/min; T_start: 100. C; T_end: 275. C
Capillary	DB-5	352.163	Tong, Shore, et al., 1984	He, 80. C @ 1. min, 3. K/min, 300. C @ 10. min; Column length: 30. m; Column diameter: 0.32 mm
Capillary	SE-52	351.51	Vassilaros, Kong, et al., 1982	20. m/0.30 mm/0.25 μm, H2, 40. C @ 2. min, 4. K/min; T_end: 265. C
Capillary	SE-52	351.22	Lee, Vassilaros, et al., 1979	12. m/0.3 mm/0.34 μm, He, 2. K/min; T_start: 50. C; T_end: 250. C

Lee's RI, non-polar column, custom temperature program

View large format table.

Column type	Active phase	I	Reference	Comment
Capillary	DB-5	351.	Fuentes, Font, et al., 2007	Column length: 60. m; Program: not specified
Capillary	HP-5MS	352.41	Wang, Li, et al., 2007	30. m/0.25 mm/0.25 μm, He; Program: 60C(2min) => 6C/min => 258C => 2C/min => 300C(4min)
Capillary	HP-5MS	351.91	Wang, Li, et al., 2007, 2	30. m/0.25 mm/0.25 μm, He; Program: not specified
Capillary	HP-5MS	352.41	Wang, Li, et al., 2007, 2	30. m/0.25 mm/0.25 μm, He; Program: not specified
Capillary	5 % Phenyl methyl siloxane	348.10	Skrbic and Onjia, 2006	Program: 70 0C (2 min) 30 0C/min -> 150 0C 5 0C/min -> 200 0C 4 0C/min -> 310 0C (5 min)
Capillary	DB-5MS	346.3	Aracil, Font, et al., 2005	Column length: 60. m; Column diameter: 0.25 mm; Program: not specified
Capillary	HP-5MS	400.00	Cheng, Liu, et al., 2005	30. m/0.30 mm/0.25 μm, He; Program: 50 0C (2 min) 8 0C/min -> 120 0C (3 min) 10 0C/min -> 230 0C
Capillary	LM-5	348.28	Ré-Poppi and Santiago-Silva, 2005	30. m/0.25 mm/0.25 μm, He; Program: 60C(2min) => 15C/min => 180C => 5C/min => 280C (10min)
Capillary	LM-5	348.46	Ré-Poppi and Santiago-Silva, 2005	30. m/0.25 mm/0.25 μm, He; Program: 60C(2min) => 15C/min => 180C => 5C/min => 280C (10min)
Capillary	Ultra-1	346.0	Sremac, Skrbic, et al., 2005	50. m/0.32 mm/0.50 μm, Nitrogen; Program: 40-100 0C 3-15 0C/min -> 290 0C
Capillary	Ultra-1	348.1	Sremac, Skrbic, et al., 2005	50. m/0.32 mm/0.50 μm, Nitrogen; Program: 40-100 0C 3-15 0C/min -> 290 0C
Capillary	Ultra-1	350.3	Sremac, Skrbic, et al., 2005	50. m/0.32 mm/0.50 μm, Nitrogen; Program: 40-100 0C 3-15 0C/min -> 290 0C
Capillary	Ultra-1	351.2	Sremac, Skrbic, et al., 2005	50. m/0.32 mm/0.50 μm, Nitrogen; Program: 40-100 0C 3-15 0C/min -> 290 0C
Capillary	DB-5	352.8	Lundstedt, Haglund, et al., 2003	30. m/0.25 mm/0.25 μm; Program: not specified
Capillary	LM-5	348.43	Ré-Poppi and Santiago-Silva, 2002	30. m/0.25 mm/0.25 μm, He; Program: 60C(2min) => 15C/min => 180C => 5C/min => 280C(5min)
Capillary	LM-5	348.46	Ré-Poppi and Santiago-Silva, 2002	30. m/0.25 mm/0.25 μm, He; Program: 60C(2min) => 15C/min => 180C => 5C/min => 280C(5min)
Capillary	HP-5	350.71	Reckendorf, 1997	25. m/0.2 mm/0.11 μm, He; Program: 106C(0.2min) => 40C/min => 120C => 3C/min => 310C(10min)
Capillary	SE-52	351.22	Wang, Peng, et al., 1997	Column length: 30. m; Column diameter: 0.30 mm; Program: not specified
Capillary	DB-5	350.52	Zamperlini, Silva, et al., 1997	30. m/0.25 mm/0.25 μm, He; Program: 90C (1min) => 10C/min => 120C => 4C/min => 310C (20min)
Capillary	DB-5	350.79	Zamperlini, Silva, et al., 1997	30. m/0.25 mm/0.25 μm, He; Program: 90C (1min) => 10C/min => 120C => 4C/min => 310C (20min)
Capillary	SE-54	351.22	Chen, 1996	Column length: 30. m; Column diameter: 0.25 mm; Program: not specified
Capillary	SE-52	351.51	Shaogang and Xiaobai, 1994	Column length: 30. m; Column diameter: 0.25 mm; Program: not specified
Capillary	CP Sil 8 CB	351.47	Bemgard, Colmsjo, et al., 1992	Column length: 25. m; Column diameter: 0.32 mm; Program: 140C (2min) => (rapidly) => 200C(2min) => 5C/min => 370C
Capillary	XTI-5	351.88	Bemgard, Colmsjo, et al., 1992	Column length: 15. m; Column diameter: 0.28 mm; Program: 140C (2min) => (rapidly) => 200C(2min) => 5C/min => 370C
Capillary	SE-54	350.83	Guillen, Iglesias, et al., 1992	Program: not specified
Capillary	DB-5	353.2	Paschke, Herbel, et al., 1992	30. m/0.25 mm/0.25 μm, He; Program: 60 0C (3 min) 10 0C/min -> 100 0C (3 min) 5 0C/min -> 300 0C
Capillary	SE-54	352.3	Peterman and Delfino, 1990	15. m/0.25 mm/0.25 μm, He; Program: 125 0C (15 min) 1 0C/min -> 131 0C 4 0C/min -> 247 0C 8 0C/min -> 280 0C (15 min)
Capillary	DB-5	348.09	Takada, Onda, et al., 1990	He; Program: 70C(2min) => 30C/min => 150C => 5C/min => 200C => 4C/min => 310C
Capillary	DB-5	351.22	Naikwadi, Charbonneau, et al., 1987	Column length: 30. m; Column diameter: 0.32 mm; Program: not specified
Capillary	DB-5	351.22	Naikwadi, Charbonneau, et al., 1987	Column length: 30. m; Column diameter: 0.32 mm; Program: not specified
Capillary	DB-5	351.98	Naikwadi, Charbonneau, et al., 1987	Column length: 30. m; Column diameter: 0.32 mm; Program: not specified
Capillary	DB-5	352.88	Naikwadi, Charbonneau, et al., 1987	Column length: 30. m; Column diameter: 0.32 mm; Program: not specified
Capillary	OV-101	351.8	Tucminen, Wickstrom, et al., 1986	Program: not specified
Capillary	DB-5	351.22	Tong, Centen, et al., 1985	He; Column length: 30. m; Column diameter: 0.25 mm; Program: not specified
Capillary	SE-52	347.32	Shlyakhov, 1984	Program: not specified
Capillary	SE-52	347.87	Shlyakhov, 1984	Program: not specified
Capillary	SE-52	348.49	Shlyakhov, 1984	Program: not specified
Capillary	SE-52	349.15	Shlyakhov, 1984	Program: not specified
Capillary	SE-52	350.66	Shlyakhov, 1984	Program: not specified
Capillary	SE-52	351.22	Shlyakhov, 1984	Program: not specified
Capillary	SE-52	352.30	Shlyakhov, 1984	Program: not specified
Capillary	SE-52	353.34	Shlyakhov, 1984	Program: not specified

References

Go To: Top, IR Spectrum, Gas Chromatography, Notes

Corbella, Rodríguez, et al., 1995
Corbella, R.; Rodríguez, M.A.; Sánchez, M.J.; Montelongo, F.G., Correlations between gas chromatographic retention data of polycyclic aromatic hydrocarbons and several molecular descriptors, Chromatographia, 1995, 40, 9/10, 532-538, https://doi.org/10.1007/BF02290264 . [all data]

Hanai and Hong, 1989
Hanai, T.; Hong, C., Structure-retention correlation in CGC, J. Hi. Res. Chromatogr., 1989, 12, 5, 327-332, https://doi.org/10.1002/jhrc.1240120517 . [all data]

Shlyakhov, Anvaer, et al., 1975
Shlyakhov, A.F.; Anvaer, B.I.; Zolotareva, O.V.; Romina, N.N.; Novikova, N.V.; Koreshkova, R.I., On the possibility of group indentification of hydrocarbons by gas chromatography from temperature coefficients of retention indices, Zh. Anal. Khim., 1975, 30, 788-792. [all data]

Song, Lai, et al., 2003
Song, C.; Lai, W.-C.; Madhusudan Reddy, K.; Wei, B., Chapter 7. Temperature-programmed retention indices for GC and GC-MS of hydrocarbon fuels and simulated distillation GC of heavy oils in Analytical advances for hydrocarbon research, Hsu,C.S., ed(s)., Kluwer Academic/Plenum Publishers, New York, 2003, 147-193. [all data]

Zhang, Shen, et al., 2000
Zhang, M.-J.; Shen, S.-D.; Chen, S.-Y.; Sun, Y.-H., Analysis of heavy oil fractions in high-temperature coal tar by capillary gas chromatography/fourier transform infrared spectrometry, Chin. J. Chromatogr., 2000, 18, 3, 241-246. [all data]

Gautzsch and Zinn, 1996
Gautzsch, R.; Zinn, P., Use of incremental models to estimate the retention indexes of aromatic compounds, Chromatographia, 1996, 43, 3/4, 163-176, https://doi.org/10.1007/BF02292946 . [all data]

Lai and Song, 1995
Lai, W.-C.; Song, C., Temperature-programmed retention indices for g.c. and g.c.-m.s. analysis of coal- and petroleum-derived liquid fuels, Fuel, 1995, 74, 10, 1436-1451, https://doi.org/10.1016/0016-2361(95)00108-H . [all data]

Podmaniczky, Szepesy, et al., 1986
Podmaniczky, L.; Szepesy, L.; Lakszner, K.; Schomburg, G., Determination of Retention Indices in LPTGC, Chromatographia, 1986, 21, 7, 387-391, https://doi.org/10.1007/BF02346137 . [all data]

Beernaert, 1979
Beernaert, H., Gas Chromatographic Analysis of Polyclylic Aromatic Hydrocarbons, J. Chromatogr., 1979, 173, 1, 109-118, https://doi.org/10.1016/S0021-9673(01)80450-7 . [all data]

Lee, Vassilaros, et al., 1979
Lee, M.L.; Vassilaros, D.L.; White, C.M.; Novotny, M., Retention Indices for Programmed-Temperature Capillary-Column Gas Chromatography of Polycyclic Aromatic Hydrocarbons, Anal. Chem., 1979, 51, 6, 768-773, https://doi.org/10.1021/ac50042a043 . [all data]

Carugno and Rossi, 1967
Carugno, N.; Rossi, S., Evaluation of polynuclear hydrocarbons in cigarette smoke by glass capillary columns, J. Gas Chromatogr., 1967, 5, 2, 103-106, https://doi.org/10.1093/chromsci/5.2.103 . [all data]

Cantuti, Cartoni, et al., 1965
Cantuti, V.; Cartoni, G.P.; Liberti, A.; Torri, A.G., Improved evaluation of polynuclear hydrocarbons in atmospheric dust by gas chromatography, J. Chromatogr., 1965, 17, 60-65, https://doi.org/10.1016/S0021-9673(00)99836-4 . [all data]

Dimitriou-Christidis, Harris, et al., 2003
Dimitriou-Christidis, P.; Harris, B.C.; McDonald, T.J.; Reese, E.; Autenrieth, R.L., Estimation of selected physicochemical properties for methylated naphthalene compounds, Chemosphere, 2003, 52, 5, 869-881, https://doi.org/10.1016/S0045-6535(03)00288-1 . [all data]

Havenga and Rohwer, 1999
Havenga, W.J.; Rohwer, E.R., Chemical Characterization and Screening of Hydrocarbon Pollution in Industrial Soils by Headspace Solid-Phase Microextraction, J. Chromatogr., 1999, 848, 1-2, 279-295, https://doi.org/10.1016/S0021-9673(99)00522-1 . [all data]

Yasuhara, Shiraishi, et al., 1997
Yasuhara, A.; Shiraishi, H.; Nishikawa, M.; Yamamoto, T.; Uehiro, T.; Nakasugi, O.; Okumura, T.; Kenmotsu, K.; Fukui, H.; Nagase, M.; Ono, Y.; Kawagoshi, Y.; Baba, K.; Noma, Y., Determination of organic components in leachates from hazardous waste disposal sites in Japan by gas chromatography-mass spectrometry, J. Chromatogr. A, 1997, 774, 1-2, 321-332, https://doi.org/10.1016/S0021-9673(97)00078-2 . [all data]

Oda, Ichikawa, et al., 1996
Oda, J.; Ichikawa, S.; Mori, T., Analysis of polycyclic aromatic hydrocarbons in airborne particulates by capillary GC/MS method with programmed temperature relative retention index, Bunseki Kagaku, 1996, 45, 9, 825-835, https://doi.org/10.2116/bunsekikagaku.45.825 . [all data]

Miao and Wu, 1999
Miao, X.; Wu, F., Study on retention behaviors of polycyclic aromatic hydrocarbons by gas chromatography in different operation models, J. Instrumental Anal., 1999, 15, 4, 288-292. [all data]

Elizalde-González, Hutfliess, et al., 1996
Elizalde-González, M.P.; Hutfliess, M.; Hedden, K., Retention index system, adsorption characteristics, and sructure correlations of polycyclic aromatic hydrocarbons in fuels, J. Hi. Res. Chromatogr., 1996, 19, 6, 345-352, https://doi.org/10.1002/jhrc.1240190608 . [all data]

Harland, Cumming, et al., 1986
Harland, B.J.; Cumming, R.I.; Gillings, E., The Kovats indexes of some organic micropollutants on an SE54 capillary column, EUR, I Org. Micropollut. Aquat. Environ., 1986, EUR 10388, 123-127. [all data]

Quilliam, Lant, et al., 1985
Quilliam, M.A.; Lant, M.S.; Kaiser-Farrell, C.; McCalla, D.R.; Sheldrake, C.P.; Kerr, A.A.; Lockington, J.N.; Gibson, E.S., Identification of polycyclic aromatic compounds in of poly-mutagenic emissions from steel casting, Biomed. Mass Spectrom., 1985, 12, 4, 143-150, https://doi.org/10.1002/bms.1200120402 . [all data]

Vichi, Pizzale, et al., 2005
Vichi, S.; Pizzale, L.; Conte, L.S.; Buxaderas, S.; L´opez-Tamames, E., Simultaneous determination of volatile and semi-volatile aromatic hydrocarbons in virgin olive oil by headspace solid-phase microextraction coupled to gas chromatography/mass spectrometry, J. Chromatogr. A, 2005, 1090, 1-2, 146-154, https://doi.org/10.1016/j.chroma.2005.07.007 . [all data]

Oda, Yasuhara, et al., 1998
Oda, J.; Yasuhara, A.; Matsunaga, K.; Saito, Y., Identification of polycyclic aromatic hydrocarbons of the particulate accumulated in the tunnel duct of freeway and generation of their oxygenated derivatives, Jpn. J. Toxicol. Environ. Health, 1998, 44, 5, 334-351, https://doi.org/10.1248/jhs1956.44.334 . [all data]

Zenkevich, 1996
Zenkevich, I.G., Informational Maitenance of Gas Chromatographic Identification of Organic Compounds in Ecoanalytical Investigations, Z. Anal. Chem., 1996, 51, 11, 1140-1148. [all data]

Waggott and Davies, 1984
Waggott, A.; Davies, I.W., Identification of organic pollutants using linear temperature programmed retention indices (LTPRIs) - Part II, 1984, retrieved from http://dwi.defra.gov.uk/research/completed-research/reports/dwi0383.pdf. [all data]

Peng, Yang, et al., 1991
Peng, C.T.; Yang, Z.C.; Ding, S.F., Prediction of rentention idexes. II. Structure-retention index relationship on polar columns, J. Chromatogr., 1991, 586, 1, 85-112, https://doi.org/10.1016/0021-9673(91)80028-F . [all data]

Shlyakhov, 1984
Shlyakhov, A.F., Gas chromatography in organic geochemistry, Nedra, Moscow, 1984, 221. [all data]

Jamoussi, Kanzari, et al., 2007
Jamoussi, B.; Kanzari, F.; Hassine, B.B.; Abderrabba, A., Using Bezier curves for the calculation of retention indices of polycyclic aromatic hydrocarbons in the so-called Lee's scale in temperature-programmed gas chromatography with mass spectrometry detection, J. Chromatogr. Sci., 2007, 45, 1, 22-27, https://doi.org/10.1093/chromsci/45.1.22 . [all data]

Wang, Hou, et al., 2007
Wang, G.; Hou, Z.; Sun, Y.; Liu, Y.; Xie, B.; Liu, S., Investigation of pyrolysis behavior of fenoxycarb using PY-GC-MS assisted with chemometric methods, Chem. Anal., 2007, 52, 141-156. [all data]

Shao, Wang, et al., 2006
Shao, X.; Wang, G.; Sun, Y.; Zhang, R.; Xie, K.; Liu, H., Determination and Characterization of the Pyrolysis Products of Isoprocarb by GC-MS, J. Chromatogr. Sci., 2006, 44, 3, 141-147, https://doi.org/10.1093/chromsci/44.3.141 . [all data]

Skrbic and Onjia, 2006
Skrbic, B.; Onjia, A., Prediction of Lee Retention Indices of Polycyclic Aromatic Hydrocarbons by Artificial Neural Networks, J. Chromatorg. A, 2006, 1108, 2, 279-284, https://doi.org/10.1016/j.chroma.2006.01.080 . [all data]

Pedersen, Durant, et al., 2005
Pedersen, D.U.; Durant, J.L.; Taghizadeh, K.; Hemond, H.F.; Lafleur, A.L.; Cass, G.R., Human cell mutagenes in respirable airborne particles from the Northeastern United States. 2. Quantification of mutagenes and other organic compounds., Environ. Sci. Technol., 2005, 39, 24, 9547-9560, https://doi.org/10.1021/es050886c . [all data]

Marynowski, Pieta, et al., 2004
Marynowski, L.; Pieta, M.; Janeczek, J., Composition and source of polycyclic aromatic compounds in deposited dust from selected sites around the Upper Silesia, Poland, Geol. Q., 2004, 48, 2, 169-180. [all data]

Chen, Keeran, et al., 2002
Chen, P.H.; Keeran, W.S.; Van Ausdale, W.A.; Schindler, D.R.; Roberts, D.W., Application of Lee retention indices to the confirmation of tentatively identified compounds from GC/MS analysis of environmental samples, Technical paper, Analytical Services Division, Environmental ScienceEngineering, Inc, PO Box 1703, Gainesville, FL 32602, 2002, 11. [all data]

Wang, Jia, et al., 2000
Wang, J.; Jia, C.R.; Wong, C.K.; Wong, P.K., Characterization of polycyclic aromatic hydrocarbons created in lubricating oils, Water Air Soil Poll., 2000, 120, 3/4, 381-396, https://doi.org/10.1023/A:1005251618062 . [all data]

Piao, Chu, et al., 1999
Piao, M.; Chu, S.; Zheng, M.; Xu, X., Characterization of the combustion products of polyethylene, Chemosphere, 1999, 39, 9, 1497-1512, https://doi.org/10.1016/S0045-6535(99)00054-5 . [all data]

Durlak, Biswas, et al., 1998
Durlak, S.K.; Biswas, P.; Shi, J.; Bernhard, M.J., Characterization of polycyclic aromatic hydrocarbon particulate and gaseous emissions from polystyrene combustion, Environ. Sci. Technol., 1998, 32, 15, 2301-2307, https://doi.org/10.1021/es9709031 . [all data]

Wang, Peng, et al., 1997
Wang, Y.; Peng, P.; Cui, S.; Zhang, Y., Identification of PAH in the Suzhou River bed sediments by GC/MS and PAH retention index system, J. Nanjing Norm. Univ. (Nat. Sci.), 1997, 20, 2, 47-68. [all data]

Chen, 1996
Chen, J., GC and GC/MS methods for the analysis of polycyclic aromatic hydrocarbon (PAH) in sediment of the grand canal of China, Toxicol. Environ. Chem., 1996, 54, 1-4, 69-73, https://doi.org/10.1080/02772249609358297 . [all data]

Williams and Horne, 1995
Williams, P.T.; Horne, P.A., Analysis of aromatic hydrocarbons in pyrolytic oil derived from biomass, J. Anal. Appl. Pyrolysis, 1995, 31, 15-37, https://doi.org/10.1016/0165-2370(94)00814-H . [all data]

Shaogang and Xiaobai, 1994
Shaogang, C.; Xiaobai, X., System for calculating the linear temperature-programmed retention indices of polycylic aromatic compounds, J. Hi. Res. Chromatogr., 1994, 17, 5, 339-342, https://doi.org/10.1002/jhrc.1240170511 . [all data]

Donnelly, Abdel-Hamid, et al., 1993
Donnelly, J.R.; Abdel-Hamid, M.S.; Jeter, J.L.; Gurka, D.F., Application of gas chromatographic retention properties to the identification of environmental contaminants, J. Chromatogr., 1993, 642, 1-2, 409-415, https://doi.org/10.1016/0021-9673(93)80106-I . [all data]

Knobloch and Engewald, 1993
Knobloch, T.; Engewald, W., Identification of some polar polycyclic compounds in emissions from brown-coal-fired residential stoves, J. Hi. Res. Chromatogr., 1993, 16, 4, 239-242, https://doi.org/10.1002/jhrc.1240160407 . [all data]

Guillén, Blanco, et al., 1989
Guillén, M.D.; Blanco, J.; Bermejo, J.; Blanco, C.G., Temperature programmed retention indices of some PAHs on Capillary columns coated with OV-1701 and SE-54, J. Hi. Res. Chromatogr., 1989, 12, 8, 552-554, https://doi.org/10.1002/jhrc.1240120816 . [all data]

Hasegawa, Muragishi, et al., 1988
Hasegawa, K.; Muragishi, T.; Usami, S., Component analysis of coal-derivated heavy oil. Analysis of carcinogenic components in neutral nonpolar fractions, Nippon Kagaku Kaishi, 1988, 3, 3, 311-320, https://doi.org/10.1246/nikkashi.1988.311 . [all data]

Sye, Lin, et al., 1988
Sye, W.-F.; Lin, C.-L.; Yen, D.-P.; Tsai, C.-S., Polycyclic aromatic-hydrocarbons formation from luel and additives combustion, J. Chinese Chem. Soc., 1988, 35, 1, 1-11. [all data]

Wise, Benner, et al., 1988
Wise, S.A.; Benner, B.A.; Byrd, G.D.; Chesler, S.N.; Rebbert, R.E.; Schantz, M.M., Determination of polycyclic aromatic hydrocarbons in a coal tar standard reference material, Anal. Chem., 1988, 60, 9, 887-894, https://doi.org/10.1021/ac00160a012 . [all data]

Boenke and Ballschmiter, 1987
Boenke, A.; Ballschmiter, K., Fused quinones as retention index marker in high resolution gas chromatography with electron-capture detection (HRGC/ECD) of oxidized aromatic compounds, Fresenius J. Anal. Chem., 1987, 327, 1, 44-45, https://doi.org/10.1007/BF00474554 . [all data]

Rostad and Pereira, 1986
Rostad, C.E.; Pereira, W.E., Kovats and Lee retention indices determined by gas chromatography/mass spectrometry for organic compounds of environmental interest, J. Hi. Res. Chromatogr. Chromatogr. Comm., 1986, 9, 6, 328-334, https://doi.org/10.1002/jhrc.1240090603 . [all data]

Tong, Centen, et al., 1985
Tong, H.Y.; Centen, J.D.; Karasek, F.W.; Jellum, E.; Helland, P., Identification of Trace Organic Compounds in Dimethyl Sulphoxide Solution Using High-Performance Liquid Chromatography and Gas Chromatography-Mass Spectrometry, J. Chromatogr., 1985, 324, 373-383, https://doi.org/10.1016/S0021-9673(01)81336-4 . [all data]

Tong, Shore, et al., 1984
Tong, H.Y.; Shore, D.L.; Karasek, F.W.; Helland, P.; Jellum, E., Identification of organic compounds obtained from incineration of municipal waste by high-performance liquid chromatographic fractionation and gas chromatography-mass spectrometry, J. Chromatogr., 1984, 285, 423-441, https://doi.org/10.1016/S0021-9673(01)87784-0 . [all data]

Vassilaros, Kong, et al., 1982
Vassilaros, D.L.; Kong, R.C.; Later, D.W.; Lee, M.L., Linear retention index system for polycyclic aromatic compounds. Critical evaluation and additional indices, J. Chromatogr., 1982, 252, 1-20, https://doi.org/10.1016/S0021-9673(01)88394-1 . [all data]

Fuentes, Font, et al., 2007
Fuentes, M.J.; Font, R.; Gomez-Rico, M.F.; Martin-Gullon, I., Pyrolysis and combustion of waste lubricant oil from diesel cars: Decomposition and pollutants, J. Anal. Appl. Pyrolysis, 2007, 79, 1-2, 215-226, https://doi.org/10.1016/j.jaap.2006.12.004 . [all data]

Wang, Li, et al., 2007
Wang, Z.; Li, K.; Lambert, P.; Yang, C., Identification, characterization and quantitation of pyrogenic polycylic aromatic hydrocarbons and other organic compounds in tire fire products, J. Chromatogr. A, 2007, 1139, 1, 14-26, https://doi.org/10.1016/j.chroma.2006.10.085 . [all data]

Wang, Li, et al., 2007, 2
Wang, Z.; Li, K.; Lambert, P.; Brown, C.E.; Yang, C.; Hollebone, B.P., Identification and characterization of polycyclic aromatic compounds in tire fire products and differentiation of pyrogenic PAHs from petrogenic PAHs in Proceedings of the 30th Arctic and Marine Oilspill (AMOP) Technical Seminar. Vol.1, 2007, 61-85. [all data]

Aracil, Font, et al., 2005
Aracil, I.; Font, R.; Conesa, J.A., Semivolatile and volatile compounds from the pyrolysis and combustion of polyvinyl chloride, J. Anal. Appl. Pyrolysis, 2005, 74, 1-2, 465-478, https://doi.org/10.1016/j.jaap.2004.09.008 . [all data]

Cheng, Liu, et al., 2005
Cheng, D.-X.; Liu, B.-X.; Sun, Y.-A.; Xie, B.; Zhang, H.-L., rapid analysis of pyrolysis products of cholesterol by GC-MS assited with boiling point - Lee retention index, journal of Instrumental Analysis - Fenxi ceshi xuebao, 2005, 24, 6, 85-88. [all data]

Ré-Poppi and Santiago-Silva, 2005
Ré-Poppi, N.; Santiago-Silva, M., Polycyclic aromatic hydrocarbons and other selected organic compounds in ambient air of Campo Grande City, Brazil, Atmos. Environ., 2005, 39, 16, 2839-2850, https://doi.org/10.1016/j.atmosenv.2004.10.006 . [all data]

Sremac, Skrbic, et al., 2005
Sremac, S.; Skrbic, B.; Onjia, A., Artificial neural network prediction of quantitative structure-retention relationships of polycyclic aromatic hydrocarbons in gas chromatography, J. Serb. Chem. Soc., 2005, 70, 11, 1291-1300, https://doi.org/10.2298/JSC0511291S . [all data]

Lundstedt, Haglund, et al., 2003
Lundstedt, S.; Haglund, P.; Öberg, L., Degradation and formation of polycyclic aromatic compounds during bioslurry treatment of an aged gasworks soil, Environ. Toxicol. Chem., 2003, 22, 7, 1413-1420, https://doi.org/10.1002/etc.5620220701 . [all data]

Ré-Poppi and Santiago-Silva, 2002
Ré-Poppi, N.; Santiago-Silva, M.R., Identification of polycyclic aromatic hydrocarbons and methoxylated phenols in wood smoke emitted during production of charcoal, Chromatographia, 2002, 55, 7/8, 475-481, https://doi.org/10.1007/BF02492280 . [all data]

Reckendorf, 1997
Reckendorf, R.M., Identification of phenyl-substituted polycyclic aromatic compounds in ring furnace gases using GC-MS and GC-AED, Chromatographia, 1997, 45, 1, 173-182, https://doi.org/10.1007/BF02505557 . [all data]

Zamperlini, Silva, et al., 1997
Zamperlini, G.C.M.; Silva, M.R.S.; Vilegas, W., Identification of polycyclic aromatic hydrocarbons in sugar cane soot by gas chromatography-mass spectrometry, Chromatographia, 1997, 46, 11/12, 655-663, https://doi.org/10.1007/BF02490527 . [all data]

Bemgard, Colmsjo, et al., 1992
Bemgard, A.; Colmsjo, A.; Lundmark, B.-O., Gas chromatographic analysis of high-molecular-weight polynuclear aromatic hydrocarbons. I. Molecular weight 328, J. Chromatogr., 1992, 595, 1-2, 247-258, https://doi.org/10.1016/0021-9673(92)85167-R . [all data]

Guillen, Iglesias, et al., 1992
Guillen, M.D.; Iglesias, M.J.; Dominguez, A.; Blanco, C.G., Polynuclear aromatic hydrocarbon retention indices on SE-54 stationary phase of the volatile components of a coal tar pitch. Relationships between chromatographic retention and thermal reactivity, J. Chromatogr., 1992, 591, 1-2, 287-295, https://doi.org/10.1016/0021-9673(92)80246-Q . [all data]

Paschke, Herbel, et al., 1992
Paschke, A.; Herbel, W.; Steinhart, H.; Franke, S.; Francke, W., Determination of mono- to tetracyclic aromatic hydrocarbons in lubricating oil, J. Hi. Res. Chromatogr., 1992, 15, 12, 827-833, https://doi.org/10.1002/jhrc.1240151211 . [all data]

Peterman and Delfino, 1990
Peterman, P.H.; Delfino, J.J., Identification of isopropylbiphenyl, alkyl diphenylmethanes, diisopropylnaphthalene, linear alkyl benzenes and other polychlorinated biphenyl replacement compounds in effluents, sediments and fish in the Fox River system, Wisconsin, Biomed. Environ. Mass Spectrom., 1990, 19, 12, 755-770, https://doi.org/10.1002/bms.1200191203 . [all data]

Takada, Onda, et al., 1990
Takada, H.; Onda, T.; Ogura, N., Determination of polycyclic aromatic hydrocarbons in urban street dusts and their source materials by capillary gas chromatography, Environ. Sci. Technol., 1990, 24, 8, 1179-1186, https://doi.org/10.1021/es00078a005 . [all data]

Naikwadi, Charbonneau, et al., 1987
Naikwadi, K.P.; Charbonneau, G.M.; Karasek, F.W.; Clement, R.E., Separation and Identification of Organic Compounds in Air Particulate Extracts by High-Performance Liquid Chromatography and Gas Chromatography-Mass Spectrometry, J. Chromatogr., 1987, 398, 227-237, https://doi.org/10.1016/S0021-9673(01)96508-2 . [all data]

Tucminen, Wickstrom, et al., 1986
Tucminen, A.; Wickstrom, K.; Pyysalo, H., Determination of Polycyclic Aromatic Compounds by GLC-Selected Ion Monitoring (SIM) Technique, J. Hi. Res. Chromatogr. Chromatogr. Comm., 1986, 9, 8, 469-471, https://doi.org/10.1002/jhrc.1240090813 . [all data]

Notes

Go To: Top, IR Spectrum, Gas Chromatography, References

Data from NIST Standard Reference Database 69: NIST Chemistry WebBook
The National Institute of Standards and Technology (NIST) uses its best efforts to deliver a high quality copy of the Database and to verify that the data contained therein have been selected on the basis of sound scientific judgment. However, NIST makes no warranties to that effect, and NIST shall not be liable for any damage that may result from errors or omissions in the Database.
Customer support for NIST Standard Reference Data products.