Saturation Properties for Water — Temperature Increments
- Fluid Data
- Auxiliary Data
- Additional Information
- Important Information About This Data
- Other Data Available:
The following adjustments were made to the specified data range:
- The specified increment was adjusted to limit the number of points calculated.
Data on Saturation Curve
Select a region with data to zoom. Select a region with no data or click the mouse on the plot to revert to the orginal display.
Moving the mouse pointer over or near a point will display the coordinates of the point. The number of digits shown do not reflect the uncertainty of the value.
On newer browsers the following keyboard commands are supported:
|L||Toggle log-log display if possible.|
|S||Toggle semilog (log Y) display if possible.|
|K||Move / hide legend (key). Repeated presses of this key will posiiton the legend in the following sequence: upper left, upper right, lower right, lower left, hidden.|
Click in or tab to the plot area to enable keyboard commands.
The following components were used in generating the plot:
- jQuery UI
- Plugins for Flot:
Additonal code used was developed at NIST: plot-data.js.
Use or mention of technologies or programs in this web site is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that these items are necessarily the best available for the purpose.
Reference States, default for fluid
|Enthalpy||H = 2551.013479 kJ/kg at 300.0 K and 0.0010 MPa.|
|Entropy||S = 9.103679 J/g*K at 300.0 K and 0.0010 MPa.|
Additional fluid properties
|Critical temperature (Tc)||647.096 K|
|Critical pressure (Pc)||22.0640 MPa|
|Critical density (Dc)||322.000000 kg/m3|
|Normal boiling point||373.1243 K|
|Dipole moment||1.855 Debye|
Equation of state and auxiliary model
Wagner, W.; Pruss, A., The IAPWS formulation 1995 for the thermodynamic properties of ordinary water substance for general and scientific use, J. Phys. Chem. Ref. Data, 2002, 31, 2, 387-535. [all data]
Saul, A.; Wagner, W., A Fundamental Equation for Water Covering the Range From the Melting Line to 1273 K at Pressures up to 25000 MPa, J. Phys. Chem. Ref. Data, 1989, 18, 4, 1537-1564. [all data]
IAPWS, Revised Release on the IAPS Formulation 1985 for the Thermal Conductivity of Ordinary Water Substance, International Association for the Properties of Water and Steam, London, 1998, 23, retrieved from http://www.iapws.org/relguide/thcond.pdf. [all data]
Thermal conductivity and viscosity
Kestin, J.; Sengers, J.V.; Kamgar-Parsi, B.; Levelt Sengers, J.M.H., Thermophysical Properties of Fluid H2O, J. Phys. Chem. Ref. Data, 1984, 13, 1, 175-183. [all data]
IAPWS, Revised Release on the IAPS Formulation 1985 for the Viscosity of Ordinary Water Substance, International Association for the Properties of Water and Steam, Erlangen, Germany, 1997, 15, retrieved from http://www.iapws.org/relguide/visc.pdf. [all data]
International Association for the Properties of Water Steam, Viscosity of thermal conductivity of heavy water substance in Physical Chemistry of Aqueous Systems: Proceedings of the 12th International Conference on the Properties of Water and Steam, Orlando, FL, 1994, a107-a138. [all data]
Fernandez, D.P.; Goodwin, A.R.H.; Lemmon, E.W.; Levelt Sengers, J.M.; Williams, R.C., A Formulation for the Static Permittivity of Water and Steam at Temperatures from 238 K to 873 K at Pressures up to 1200 MPa, Including Derivatives and Debye-Huckel Coefficients, J. Phys. B: At. Mol. Opt. Phys., 1997, 26, 4, 1125-1165. [all data]
Wagner, W.; Saul, A.; Pruss, A., International Equations for the Pressure Along the Melting and Along the Sublimation Curve of Ordinary Water Substance, J. Pharm. Sci, 1994, 23, 3, 515-527. [all data]
Equation of state
The uncertainty in density of the equation of state is 0.0001% at 1 atm in the liquid phase, and 0.001% at other liquid states at pressures up to 10 MPa and temperatures to 423 K. In the vapor phase, the uncertainty is 0.05% or less. The uncertainties rise at higher temperatures and/or pressures, but are generally less than 0.1% in density except at extreme conditions. The uncertainty in pressure in the critical region is 0.1%. The uncertainty of the speed of sound is 0.15% in the vapor and 0.1% or less in the liquid, and increases near the critical region and at high temperatures and pressures. The uncertainty in isobaric heat capacity is 0.2% in the vapor and 0.1% in the liquid, with increasing values in the critical region and at high pressures. The uncertainties of saturation conditions are 0.025% in vapor pressure, 0.0025% in saturated liquid density, and 0.1% in saturated vapor density. The uncertainties in the saturated densities increase substantially as the critical region is approached.
For the uncertainties in the thermal conductivity, see the IAPWS Release.
For the uncertainties in the viscosity, see the IAPWS Release.
For the uncertainties in surface tension, see the IAPWS Release.
Important Information About This Data
The data above are from an older version of the NIST Reference Fluid Thermodynamic and Transport Properties Database (REFPROP version 7). We will be updating our site to use the newer version (version 10) of this database in the future. Information on REFPROP version 10 can be found on theREFPROP web page. REFPROP version 10 includes additional data and features not available from this site.
- Data from NIST Standard Reference Database 69: NIST Chemistry WebBook
- The National Institute of Standards and Technology (NIST) uses its best efforts to deliver a high quality copy of the Database and to verify that the data contained therein have been selected on the basis of sound scientific judgment. However, NIST makes no warranties to that effect, and NIST shall not be liable for any damage that may result from errors or omissions in the Database.
- Customer support for NIST Standard Reference Data products.