Isothermal Properties for Argon
- Fluid Data
- Auxiliary Data
- Additional Information
- Important Information About This Data
- Other Data Available:
Isothermal Data for T = 0.0000 C
Select a region with data to zoom. Select a region with no data or click the mouse on the plot to revert to the orginal display.
Moving the mouse pointer over or near a point will display the coordinates of the point. The number of digits shown do not reflect the uncertainty of the value.
On newer browsers the following keyboard commands are supported:
|L||Toggle log-log display if possible.|
|S||Toggle semilog (log Y) display if possible.|
|K||Move / hide legend (key). Repeated presses of this key will posiiton the legend in the following sequence: upper left, upper right, lower right, lower left, hidden.|
Click in or tab to the plot area to enable keyboard commands.
The following components were used in generating the plot:
- jQuery UI
- Plugins for Flot:
Additonal code used was developed at NIST: plot-data.js.
Use or mention of technologies or programs in this web site is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that these items are necessarily the best available for the purpose.
Reference States, default for fluid
|Enthalpy||H = 6.18938 kJ/mol at 25.00 C and 0.9869 atm.|
|Entropy||S = 154.826 J/mol*K at 25.00 C and 0.9869 atm.|
Additional fluid properties
|Critical temperature (Tc)||-122.463 C|
|Critical pressure (Pc)||47.994 atm|
|Critical density (Dc)||535.599 kg/m3|
|Normal boiling point||-185.848 C|
|Dipole moment||0.0 Debye|
Equation of state, auxiliary model, and melting curve
Tegeler, Ch.; Span, R.; Wagner, W., A New Equation of State for Argon Covering the Fluid Region for Temperatures from the Melting Line to 700 K at Pressures up to 1000 MPa, J. Phys. Chem. Ref. Data, 1999, 28, 3, 779-850. [all data]
Stewart, R.B.; Jacobsen, R.T., Thermodynamic Properties of Argon from the Triple Point to 1200 K at Pressures to 1000 MPa, J. Phys. Chem. Ref. Data, 1989, 18, 2, 639-798. [all data]
Younglove, B.A., Thermophysical Properties of Fluids. I. Argon, Ethylene, Parahydrogen, Nitrogen, Nitrogen Trifluoride, and Oxygen, J. Phys. Chem. Ref. Data, 1982, 11, 1-11. [all data]
Perkins, R.A.; Friend, D.G.; Roder, H.M.; Nieto de Castro, C.A., Thermal Conductivity Surface of Argon: A Fresh Analysis, Int. J. Thermophys., 1991, 12, 6, 965-984. [all data]
Auxiliary model and viscosity
Younglove, B.A.; Hanley, H.J.M., The Viscosity and Thermal Conductivity Coefficients of Gaseous and Liquid Argon, J. Phys. Chem. Ref. Data, 1986, 15, 4, 1323-1337. [all data]
Lemmon, E.W.; Penoncello, S.G., The Surface Tension of Air and Air Component Mixtures, Adv. Cryo. Eng., 1994, 39, 1927-1934. [all data]
Equation of state
The estimated uncertainty in density is less than 0.02% for pressures up to 12 MPa and temperatures up to 340 K with the exception of the critical region and less than 0.03% for pressures up to 30 MPa and temperatures between 235 and 520 K. Elsewhere, the uncertainty in density is generally within 0.2%. In the region with densities up to half the critical density and for temperatures between 90 and 450 K, the estimated uncertainty of calculated speeds of sound is in general less than 0.02%. In the liquid and supercritical regions, the uncertainty is less than 1%. The uncertainty in heat capacities is within 0.3% for the vapor and 2% for the liquid. The formulation gives reasonable extrapolation behavior up to very high pressures (50 GPa) and temperatures (17000 K).
The uncertainty in thermal conductivity is 2%.
The uncertainty in viscosity is 2%, except in the dilute gas, where the uncertainty is 0.5%.
The uncertainty in thermal conductivity is 2.2%.
Important Information About This Data
The data above are from an older version of the NIST Reference Fluid Thermodynamic and Transport Properties Database (REFPROP version 7). We will be updating our site to use the newer version (version 10) of this database in the future. Information on REFPROP version 10 can be found on theREFPROP web page. REFPROP version 10 includes additional data and features not available from this site.
- Data from NIST Standard Reference Database 69: NIST Chemistry WebBook
- The National Institute of Standards and Technology (NIST) uses its best efforts to deliver a high quality copy of the Database and to verify that the data contained therein have been selected on the basis of sound scientific judgment. However, NIST makes no warranties to that effect, and NIST shall not be liable for any damage that may result from errors or omissions in the Database.
- Customer support for NIST Standard Reference Data products.