Isochoric Properties for Carbon dioxide
- Fluid Data
- Auxiliary Data
- Additional Information
- Important Information About This Data
- Other Data Available:
Isochoric Data for D = 0.92500 g/ml
Select a region with data to zoom. Select a region with no data or click the mouse on the plot to revert to the orginal display.
Moving the mouse pointer over or near a point will display the coordinates of the point. The number of digits shown do not reflect the uncertainty of the value.
On newer browsers the following keyboard commands are supported:
|L||Toggle log-log display if possible.|
|S||Toggle semilog (log Y) display if possible.|
|K||Move / hide legend (key). Repeated presses of this key will posiiton the legend in the following sequence: upper left, upper right, lower right, lower left, hidden.|
Click in or tab to the plot area to enable keyboard commands.
The following components were used in generating the plot:
- jQuery UI
- Plugins for Flot:
Additonal code used was developed at NIST: plot-data.js.
Use or mention of technologies or programs in this web site is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that these items are necessarily the best available for the purpose.
Reference States, IIR Convention
|Enthalpy||H = 200 kJ/kg at 0°C for saturated liquid.|
|Entropy||S = 1 J/g*K at 0°C for saturated liquid.|
Additional fluid properties
|Critical temperature (Tc)||30.9782 C|
|Critical pressure (Pc)||73.773 bar|
|Critical density (Dc)||0.467600 g/ml|
|Normal boiling point||-78.40 C|
|Dipole moment||0.0 Debye|
Equation of state, auxiliary model, melting curve, and sublimation curve
Span, R.; Wagner, W., A New Equation of State for Carbon Dioxide Covering the Fluid Region from the Triple-Point Temperature to 1100 K at Pressures up to 800 MPa, J. Phys. Chem. Ref. Data, 1996, 25, 6, 1509-1596. [all data]
Ely, J.F.; Magee, J.W.; Haynes, W.M., Thermophysical properties for special high CO2 content mixtures, Research Report RR-110, Gas Processors Association, Tulsa, OK, 1987, 0. [all data]
McCarty, R.D., Correlations for the Thermophysical Properties of Carbon Monoxide, National Institute of Standards and Technology, Boulder, CO, 1989, 0. [all data]
Vesovic, V.; Wakeham, W.A.; Olchowy, G.A.; Sengers, J.V.; Watson, J.T.R.; Millat, J., The transport properties of carbon dioxide, J. Phys. Chem. Ref. Data, 1990, 19, 763-808. [all data]
Olchowy, G.A.; Sengers, J.V., A simplified representation for the thermal conductivity of fluids in the critical region, Int. J. Thermophysics, 1989, 10, 417-426. [all data]
Viscosity and auxiliary model
Fenghour, A.; Wakeham, W.A.; Vesovic, V., The Viscosity of Carbon Dioxide, J. Phys. Chem. Ref. Data, 1998, 27, 31-44. [all data]
Rathjen, W.; Straub, J., Temperature dependence of surface tension, coexistence curve, and vapor pressure of CO2, CClF3, CBrF3, and SF6 in Heat Transfer in Boiling, Academic Press, New York, 1977, 425-451. [all data]
Equation of state
At pressures up to 30 MPa and temperatures up to 523 K, the estimated uncertainty ranges from 0.03% to 0.05% in density, 0.03% (in the vapor) to 1% in the speed of sound (0.5% in the liquid) and 0.15% (in the vapor) to 1.5% (in the liquid) in heat capacity. Special interest has been focused on the description of the critical region and the extrapolation behavior of the formulation (to the limits of chemical stability).
Use of this Cp0 equation in conjunction with Ely's BWR will produce numbers identical to those calculated in NIST12, Version 3.0.
Note: Vesovic et al. use a crossover equation of state to compute derivatives in the critical region; the default EOS is used here. Also, their "simplified" critical enhancement for thermal conductivity is used.
The uncertainty in thermal conductivity is less than 5%.
The uncertainty in viscosity ranges from 0.3% in the dilute gas near room temperature to 5% at the highest pressures.
Important Information About This Data
The data above are from an older version of the NIST Reference Fluid Thermodynamic and Transport Properties Database (REFPROP version 7). We will be updating our site to use the newer version (version 10) of this database in the future. Information on REFPROP version 10 can be found on theREFPROP web page. REFPROP version 10 includes additional data and features not available from this site.
- Data from NIST Standard Reference Database 69: NIST Chemistry WebBook
- The National Institute of Standards and Technology (NIST) uses its best efforts to deliver a high quality copy of the Database and to verify that the data contained therein have been selected on the basis of sound scientific judgment. However, NIST makes no warranties to that effect, and NIST shall not be liable for any damage that may result from errors or omissions in the Database.
- Customer support for NIST Standard Reference Data products.